Soft Top Bracket Fabrication Sketch - Hole Spacing & Dimensions (Hand-Drawn)

This document is a hand-drawn dimensional sketch (blueprint-style) of a soft top mounting bracket, uploaded to a vehicle gallery on SuperMotors.net. It presents two views: a Top View showing the bracket width of 1 1/16 inches, and a Side View showing the bracket profile with an overall length of 3 7/8 inches. The side view depicts an elongated plate with chamfered (angled) corners and four drilled holes. Three of the holes are spaced 3/4 inch apart from one another, while the fourth hole sits 1 3/16 inches from the opposite end of the bracket, with an additional 5/16 dimension noted near that hole (likely the hole diameter or an edge offset). The drawing contains no part numbers, material specifications, thickness callouts, vehicle model information, or dates. A reader could use this sketch as a template to fabricate a replacement soft top bracket, laying out the overall plate size and hole-drilling pattern. Because the drawing is undated and unlabeled as to application, its fit for any specific vehicle relies entirely on the uploader's attribution rather than on information contained in the document itself.