2004 Saturn VUE Underhood Fuse Box Diagram - Relay Layout & Fuse Amperages
Underhood fuse/relay panel layout with amp ratings: 40A batt feed/ABS/PWR WDW/HVAC blower, 30A ignition, 25A emiss, plus fog lamp, horn, cooling fan, fuel pump and wiper fuses for L4 and V6.
Part of 2002-2007 Saturn Vue Fuse & Relay Charts
This document is an underhood fuse and relay block diagram, uploaded as applying to a 2004 Saturn VUE. It shows the physical layout of the engine-compartment fuse box, labeling each relay position (FOG LP, DRL, HORN, cooling fan relays, ENG MAIN, REAR DEFOG, WIPER SYSTEM, PWR WDW, FRT WIPER, A/C CLUTCH, BACKUP LAMP, FUEL PUMP, RR WIPER) and every fuse with its amperage rating. Standard fuses range from 10A to 25A and cover circuits such as ECM/TCM, HORN, EMISS, REAR DEFOG, headlamps, wipers, ABS, ETC, SUNROOF, CIGAR/AUX 2, BRAKE, HTD SEATS, injectors, PWR TRAIN, BACKUP, A/C CLUTCH, FUEL PUMP, AUX1 OUTLET, and PREM AUD. A right-hand column lists high-amperage fuses: 40A BATT FEED, 40A ABS PWR, cooling fan fuses (COOL HI L4 40A / COOL 1 V6 25A; COOL LO L4 20A / COOL 2 V6 25A), 40A PWR WDW, 40A HVAC BLOWER, 30A IGN, and 30A PWR SEAT. Several positions differ between the L4 (4-cylinder) and V6 engines, notably the EMISS fuse (10A L4 / 15A V6) and the cooling fan circuits. A fuse puller location and an A/C diode are also identified. Readers can use this to locate and verify the correct fuse for a given circuit and engine option.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What amperage is the fuel pump fuse in the Saturn VUE underhood fuse box?
- The FUEL PUMP fuse is 10A, located next to the A/C CLUTCH 10A fuse near the fuel pump relay.
- Which fuses differ between the L4 and V6 engines?
- The EMISS fuse is 10A for the L4 and 15A for the V6; cooling fan fuses are COOL HI (L4) 40A vs COOL 1 (V6) 25A, and COOL LO (L4) 20A vs COOL 2 (V6) 25A. The relays also differ: COOL FAN HI (L4)/COOL FAN 1 (V6) and COOL FAN LOW (L4)/COOL FAN 2 (V6), plus a BACKUP LAMP relay for the V6 and an INJECTORS (V6) 10A fuse.
- What size is the power window (PWR WDW) fuse?
- The PWR WDW fuse is 40A, located in the right-hand column of high-amperage fuses; there is also a PWR WDW relay in the block.
- Where is the fuse for the heated seats and what is its rating?
- The HTD SEATS fuse is a 20A fuse located in the lower right area of the fuse block, near the BRAKE 15A and CIGAR/AUX 2 20A fuses.
- What high-amperage fuses are in this fuse block?
- 40A BATT FEED, 40A ABS PWR, COOL HI (L4) 40A / COOL 1 (V6) 25A, 40A PWR WDW, 40A HVAC BLOWER, 30A IGN, COOL LO (L4) 20A / COOL 2 (V6) 25A, and 30A PWR SEAT.
Comments
More from this build
No comments yet.