SIMG0008.JPG 1076 hits | 58.22 KB | Posted: 2005-04-10 Driver's side bracket is mounted and bolted up tight. Now to the passengers side.... (Posted in: Multiple Front Shock Mount)
SIMG0006.JPG 903 hits | 60.1 KB | Posted: 2005-04-10 This pic is after going to the hardware store. Everything replaced with Grade 8. Also bought lock washers for the mounting bolts. What a difference good hardware makes.... (Posted in: Multiple Front Shock Mount)
SIMG0005.JPG 862 hits | 58.14 KB | Posted: 2005-04-10 This is what comes in the kit. The only complaint so far is the lack of quality hardware. Grade 5 Bolts and the wrong size mounting bolts. I'll never understand why Skyjacker will send 3/8" Bolts to go into a 1/2" hole.... (Posted in: Multiple Front Shock Mount)
SIMG0007.JPG 1090 hits | 42.19 KB | Posted: 2005-04-10 This is the Kit from Skyjacker - Part Number DS280... (Posted in: Multiple Front Shock Mount)
SIMG0002.JPG 480 hits | 45.62 KB | Posted: 2005-03-20 New Center Pins - 7/16" from 4 Wheel Parts Wholesalers.... (Posted in: Zero-Rate Leaf)
Speaker Box Template.JPG 686 hits | 66.47 KB | Posted: 2005-03-20 This is the Cardboard template of the top plate.... (Posted in: Sub-Woofer Enclosure)
SIMG0023.JPG 350 hits | 59.94 KB | Posted: 2005-03-20 Shot shows plates cut and edges smoothed with a file. a 7/16 hole has been drilled in the very center to accept the new center pin bolt. I will sandwich this between the lower spring leaf and the Skyjacker pinion angle shim.... (Posted in: Zero-Rate Leaf)
SIMG0025.JPG 475 hits | 70.43 KB | Posted: 2005-03-20 Skyjacker Dual Steering Stablizer. Ok with stock suspension but not long enough for a 6" kit. Their suggestion t ge the shocks at a better angle is to move the bracket down on the frame and weld. Instead of all of that, Why not just make the bracket 6" longer???... (Posted in: Steering Stablizer Bracket)
SIMG0007.JPG 401 hits | 61.28 KB | Posted: 2005-03-19 Shot of the Skyjacker 4" Softride Leaf Spring. I still cannot figure out why they ship 4" springs with a 6" Lift???... (Posted in: Zero-Rate Leaf)
SIMG0017.JPG 372 hits | 32.08 KB | Posted: 2005-03-19 The front (ground to top of fender) 42-3/4".... (Posted in: Zero-Rate Leaf)
SIMG0016.JPG 354 hits | 36.93 KB | Posted: 2005-03-19 The rear (ground to top of fender) is 42-1/4"... (Posted in: Zero-Rate Leaf)
SIMG0012.JPG 449 hits | 51.46 KB | Posted: 2005-03-19 Total height from base of springplate to the top of the Degree shim is 2-13/16".... (Posted in: Zero-Rate Leaf)
