Scott Hill > 1991 Ford Bronco

1991 Ford Bronco
Owner: Scott Hill 
From: Houston, TX, U.S.A.        (Other registries in TX)
Year, Make, & Model: 1991 Ford Bronco        (Other Ford Broncos)
Avatar:
Nickname: The Beast
Mileage: 160000
Engine: 5.0 EFI (rebuilt @ 90,000 Miles)
Cast Iron GT40 Heads (Installed @ 90,000 Miles)
Ford Motorsport Cobra Roller Rockers 1:7 Raito (Installed @ 90,000 Miles)
Ford Motorsport Stainless Headers (Installed @ 90,000 Miles)
Ford Motorsport 9mm Blue Plug Wires (Installed @ 90,000 Miles)
K&N Filter Charger System (Installed @ 91,000 Miles)
MSD Blaster Coil (Installed @ 90,000 Miles)
Drivetrain: E4OD Transmission (Rebuilt @ 87,000 Miles)
1356 Electric Shift Transfer Case (Replaced @ 87, 000 Miles)
Stock Rear Drive Shaft (Replaced @ 87,000 Miles)
Stock Front Drive Shaft
Stock 8.8 Rear Axle 3:55 Ratio
Stock TTB Front Axle 3:54 Ratio
Notes: Suspension:
Skyjacker 6" Class II Lift 286BKS-A (Feb 04)
Skyjacker Extended Rear Sway Bar Links SBE205 (Feb 04)
Skyjacker Front Sway Bar Lowering Bracket SBL20 (Modified for Extra Strength) (Feb 04)
Custom Traction Bar Setup

Steering:
Saginaw Power Steering Swap (Jan 05)
Skyjacker Dual Steering Stabilizer #7240 (July 04)
Custom Steering Stabilizer Frame Bracket (July 04)

Shocks:
Ford Quad Front Shock Plates (Feb 04)
Skyjacker Hydro 7000 Series H7055 Front Left & Right (Feb 04)
Skyjacker Hydro 7000 Series H7057 Front Left & Right (Feb 04)
Skyjacker Hydro 7000 Series H7060 Rear Left & Right (Feb 04)
Skyjacker Dual Front Shock Mounting Tabs DS280 (Jan 05)
Skyjacker Hydro 7000 Series H7055 Front Left & Right (Jan 05)

Brakes:
F350 Brake Booster Upgrade (Apr 03)
F350 Master Cylinder (Apr 03)
New Front Pads (May 04)
F-350 Rear Wheel Cylinders (Apr 03)
New Rear Shoes & Springs (Apr 03)
Superlift Extended Front Brake Lines (Feb 04)

Wheels & Tires:
Ford Deep Dish Aluminum Rims
35” BFG All Terrain KO
McGuard Wheel Locks

Extras:
Custom Aluminum Grille Guard with Step, Light Bar and Brush Guard
CARR Super Hoop Steps
Sony X-plod AM/FM CD Head Unit
Boston Acoustic Speakers – Factory Locations
Sony 10” Sub-Woofer with custom Enclosure Cargo Area Side Wall
Sony AMP Installed behind cargo area trim
Class III Towing Hitch Receiver
Custom Aluminum Hitch Plate
Last Updated: 6/20/2005
Hits: 14378
Album
Folder Hits Comments Created Updated
folder Grille Guard5003,01701/3/051/3/05
folder Traction Bar9002,72001/3/053/19/05
folder Sub-Woofer Enclosure3004,37901/3/053/20/05
folder Rear Diff Cover14006,12102/19/056/20/05
folder Lift Kit Parts1002,65802/19/052/19/05
folder Zero-Rate Leaf7002,76203/19/053/20/05
folder Steering Stablizer Bracket10047503/20/053/20/05
folder Multiple Front Shock Mount4003,93104/10/054/10/05
Newest Media Files
5/16" 20 thread x 1.25" Hex head bolts and 3/16" Hex socket.
SIMG0001.JPG
492 hits | 104.14 KB | Posted: 6/20/05
5/16" 20 thread x 1.25" Hex head bolts and 3/16" Hex socket.
Complete.
SIMG0012.JPG
487 hits | 67.12 KB | Posted: 5/30/05
Complete.
Another Picture
SIMG0011.JPG
534 hits | 46.89 KB | Posted: 5/30/05
Another Picture
Cover Installed
SIMG0010.JPG
505 hits | 47.01 KB | Posted: 5/30/05
Cover Installed
Driver's side bracket is mounted and bolted up tight. Now to the passengers side.
SIMG0008.JPG
1076 hits | 58.22 KB | Posted: 4/10/05
Driver's side bracket is mounted and bolted up tight. Now to the passengers side.
This pic is after going to the hardware store. Everything replaced with Grade 8. Also bought lock washers for the mounting bolts. What a difference good hardware makes.
SIMG0006.JPG
903 hits | 60.1 KB | Posted: 4/10/05
This pic is after going to the hardware store. Everything replaced with Grade 8. Also bought lock washers for the mounting bolts. What a difference good hardware makes.
This is what comes in the kit. The only complaint so far is the lack of quality hardware. Grade 5 Bolts and the wrong size mounting bolts. I'll never understand why Skyjacker will send 3/8" Bolts to go into a 1/2" hole.
SIMG0005.JPG
862 hits | 58.14 KB | Posted: 4/10/05
This is what comes in the kit. The only complaint so far is the lack of quality hardware. Grade 5 Bolts and the wrong size mounting bolts. I'll never understand why Skyjacker will send 3/8" Bolts to go into a 1/2" hole.
This is the Kit from Skyjacker - Part Number DS280
SIMG0007.JPG
1090 hits | 42.19 KB | Posted: 4/10/05
This is the Kit from Skyjacker - Part Number DS280
New Center Pins - 7/16" from 4 Wheel Parts Wholesalers.
SIMG0002.JPG
480 hits | 45.62 KB | Posted: 3/20/05
New Center Pins - 7/16" from 4 Wheel Parts Wholesalers.
Most Viewed Files
This is the parts I gathered for the Bronco's Lift. Skyjacker Class II 6", Softride Rear Springs, Front Swaybar Drop Brackets, Rear Sway Bar End Links, 6-Hydro shocks, Energy Suspension Bushings (Axle Piviot, Front and Rear Sway Bar & Body Mounts) Qu...
Lift Kit Parts.jpg
2658 hits | 113.42 KB | Posted: 2/19/05
This is the parts I gathered for the Bronco's Lift. Skyjacker Class II 6", Softride Rear Springs, Front Swaybar Drop Brackets, Rear Sway Bar End Links, 6-Hydro shocks, Energy Suspension Bushings (Axle Piviot, Front and Rear Sway Bar & Body Mounts) Qu...
Speaker Box 1.JPG
Speaker Box 1.JPG
2201 hits | 67.58 KB | Posted: 1/3/05
Speaker Box 2.JPG
Speaker Box 2.JPG
1492 hits | 62.91 KB | Posted: 1/3/05
This is the Kit from Skyjacker - Part Number DS280
SIMG0007.JPG
1090 hits | 42.19 KB | Posted: 4/10/05
This is the Kit from Skyjacker - Part Number DS280
Driver's side bracket is mounted and bolted up tight. Now to the passengers side.
SIMG0008.JPG
1076 hits | 58.22 KB | Posted: 4/10/05
Driver's side bracket is mounted and bolted up tight. Now to the passengers side.
Grille Guard Installed 1
Angle View.jpg
1024 hits | 100.94 KB | Posted: 1/3/05
Grille Guard Installed 1
This pic is after going to the hardware store. Everything replaced with Grade 8. Also bought lock washers for the mounting bolts. What a difference good hardware makes.
SIMG0006.JPG
903 hits | 60.1 KB | Posted: 4/10/05
This pic is after going to the hardware store. Everything replaced with Grade 8. Also bought lock washers for the mounting bolts. What a difference good hardware makes.
This is what comes in the kit. The only complaint so far is the lack of quality hardware. Grade 5 Bolts and the wrong size mounting bolts. I'll never understand why Skyjacker will send 3/8" Bolts to go into a 1/2" hole.
SIMG0005.JPG
862 hits | 58.14 KB | Posted: 4/10/05
This is what comes in the kit. The only complaint so far is the lack of quality hardware. Grade 5 Bolts and the wrong size mounting bolts. I'll never understand why Skyjacker will send 3/8" Bolts to go into a 1/2" hole.
This is the Cardboard template of the top plate.
Speaker Box Template.JPG
686 hits | 66.47 KB | Posted: 3/20/05
This is the Cardboard template of the top plate.
Maintenance & Modification Logs
This user hasn't added any log entries, yet.