SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
WD-40, RTV silicone, Duralast thermostat, pliers and sandpaper on a black step stool
Home/ Registry/ Ford/ Bronco/ 1992–1996/ 1992 Bronco supermotors.net/registry/21226

1992 Ford Bronco

documented by Bill Crozier 11 photos documented since ♡ Follow this build

Photos

1992 Ford Bronco — Here are the tools you will need. 12MM long socket or a shorty with a small extension Plyers to take off the… 1992 Ford Bronco — Here we can see what we are dealing with. I removed the air intake hoses already and I have been soaking the… The upper radiator hose was simply removed from the housing and shoved to the side. I found it easier to take… 1992 Ford Bronco — I was able to take the bolts out using the 12MM and nothing snapped. (yah me!!!) This is what we are looking… 1992 Ford Bronco — And this is the nasty engine side. 1992 Ford Bronco — This is after scraping off the nasty gasket and hitting it with sandpaper to clean it up. Once I finished thi… 1992 Ford Bronco — I also hit the engine side with sandpaper and wiped it out the best that I could. Once wiped out, I started t… 1992 Ford Bronco — When putting the new thermostat back in the housing, make sure you put the correct side in. If it is reversed… 1992 Ford Bronco — First, I put silicone on the housing itself. Make sure you get around the bolt holes. 1992 Ford Bronco — Then put on the gasket and (not pictured) more silicone. 1992 Ford Bronco — and finally, put the housing back on the engine. I had already sprayed the bolts with WD-40 at this point. Fi…
See every Ford Bronco in the registry The 1992–1996 Ford Bronco registry

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.