SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
White Ford pickup with hood up in an auto repair shop, front 3/4 view near a lift and cone.
Home/ Registry/ Ford/ Bronco/ 1992–1996/ 1992 Bronco supermotors.net/registry/21414

1992 Ford Bronco

documented by Bill Crozier 19 photos documented since ♡ Follow this build

Photos

1992 Ford Bronco — Here is the patient, ready for surgery. 1992 Ford Bronco — That's the water pump way down there.. Looks like we need to move some things around. 1992 Ford Bronco — I decided to remove the radiator so I would not accidentally damage it. I used an 8MM socket to take off the… 1992 Ford Bronco — I also took off the rubber air inlets so I could have more room to work. 8MM works here also 1992 Ford Bronco — A 10MM is used for the fan shroud and the radiator supports. The extension is helpful at this stage. 1992 Ford Bronco — This small line goes to the intake. I only removed it from this side and swung it out of the way and let it l… 1992 Ford Bronco — I used a few extensions to get to that lower radiator hose clamp. As a footnote, I used a reducing adapter fo… 1992 Ford Bronco — a 1/2 inch line wrench and a 5/8 open end is used to take off the transmission lines. USE A LINE WRENCH. tryi… 1992 Ford Bronco — With the radiator and shroud out of the way, this is what we are looking at. There is a LOT more room to work… 1992 Ford Bronco — an 11MM box end wrench was used for the fan bolts. I found it easier to do this while the belt was still on.… 1992 Ford Bronco — A 5/8 socket, a solid socket wrench and a 4 foot leverage makes quick work of the belt. 1992 Ford Bronco — After removing the two small lines at the top of the pump, it was time to remove the AC/power steering bracke… 1992 Ford Bronco — OK.. I got lazy and pulled out the air ratchet. 13MM bolts take off the rest of those holding on the water pu… 1992 Ford Bronco — This sediment did concern me a bit. It came off easy enough but, hopefully all of that rust is from the old r… 1992 Ford Bronco — The old pump verses the new pump.. Yeah, it was time for a new one. If you look at the old pump in about the… 1992 Ford Bronco — Before putting the gasket sealer on, test fit the gasket first to make sure you have the correct side exposed. 1992 Ford Bronco — Once you put the gasket on and put the sealant on the other side, wipe off and excess. You DID clean the engi… 1992 Ford Bronco — Everything goes back together the same way it came off. You can't see it but I took the time to paint the fan… The only thing not shown is the leverage bar I used for the belt tension spring. This is all I needed and you…
See every Ford Bronco in the registry The 1992–1996 Ford Bronco registry

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.