IMG_0140.JPG
3556 hits | 48.78 KB | Posted: 12/19/04
Remove the upper 5 phillips screws from in between the slots on the cowl/valance. May as well get yo...

IMG_0141.JPG
2574 hits | 48.98 KB | Posted: 12/19/04
Then remove the almost dozen screws along the front of the cowl under the hood.

IMG_0146.JPG
2635 hits | 66.48 KB | Posted: 12/19/04
Pull off the windshield washer hose off the squirter and let it hang out of the way. Dang ! I forgot...

IMG_0149.JPG
2523 hits | 61.5 KB | Posted: 12/19/04
Now you can lift and tip the cowl far enough forward out of the way to get access to the 3/8" bolt a...

IMG_0152.JPG
2506 hits | 51.99 KB | Posted: 12/19/04
Here's me undoing the bolt from here. I was happy Miesk5 tipped me off to the fact I could get away ...

Cowl 2.JPG
2730 hits | 71.21 KB | Posted: 12/19/04
This inner cowl needs the front screws removed to allow you to lift the inner cowl high enough to ge...

IMG_0154.JPG
2314 hits | 69.41 KB | Posted: 12/19/04
Then it's just a matter of twisting off the 3 mounting bolts and out comes the motor. As the last p...

IMG_0159.JPG
2185 hits | 71.87 KB | Posted: 12/19/04
Nasty surprise ! The cheap swine don't supply all the rubber isolation mounts, just one !

IMG_0164.JPG
2199 hits | 63.6 KB | Posted: 12/19/04
I broke out the hack saw and liberated my old isolation mounts. There's gonna be violence if there's...

IMG_0162.JPG
2159 hits | 46.56 KB | Posted: 12/19/04
Freed from the old motor.

IMG_0165.JPG
1989 hits | 70.88 KB | Posted: 12/19/04
There ! Back where I should have been 5 minutes ago !

IMG_0170.JPG
2097 hits | 69.35 KB | Posted: 12/19/04
This is the trick Steve83 imparted to me. Look how much room and play there is in the rack to pull i...

IMG_0168.JPG
2166 hits | 64.46 KB | Posted: 12/19/04
Here I am sqeezing dielectric grease into the wiper harness plug to prevent corrosion and encourage ...

IMG_0171.JPG
2080 hits | 74.3 KB | Posted: 12/19/04
Plugged in the harness, snapped on the wiper switch and I'm back in the game, ready to face a Canadi...