IMG_0114.JPG 2573 hits | 55.41 KB | Posted: 8/22/04 This filter goes inside a screw on cannister lid under the driver on the frame rail. It's peculiar t...
IMG_0073.JPG 3407 hits | 72.93 KB | Posted: 11/27/05 On 85 and 86s this is your fuel filter housing. located on the inside of the frame rail under the dr...
IMG_0085.JPG 1623 hits | 59.91 KB | Posted: 11/27/05 This is the way the filter should be loaded into the lid.
IMG_0089.JPG 1967 hits | 78.07 KB | Posted: 11/27/05 Here's the filter housing without the lid.
IMG_0078.JPG 1761 hits | 63.21 KB | Posted: 11/27/05 You don't need sealant or grease on the threads or anything on the threads to seal it. All you need ...
IMG_0079.JPG 1497 hits | 56.23 KB | Posted: 11/27/05 Then you just need a new O-ring. If you look carefully you'll actually see an O-ring already in the ...
IMG_0081.JPG 1401 hits | 55.04 KB | Posted: 11/27/05 The tiny screwdriver is resting on the O-ring in it's groove in the lid.
IMG_0087.JPG 1581 hits | 56.44 KB | Posted: 11/27/05 If you overtighten the lid all you achieve is crushing the filter (like I did last time). Each time ...
IMG_0090.JPG 1594 hits | 60.33 KB | Posted: 11/27/05 This here is the oil breather filter. Many new Bronco owners overlook changing this. If you fail to ...