SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1980–1986/ “Eddie Bauer”/ Timken front bearing install supermotors.net/registry/4970/17982

Album section

Timken front bearing install

From 1986 Ford Bronco “Eddie Bauer” — documented by Sixlitre.

12 photos
← Back to this vehicle
1986 Ford Bronco - Timken bearings from a bearing supply house turned out to be cheaper than my jobber's off shore brand. Inners (left) were $13.23 CDN and ou… 1986 Ford Bronco - First thing off, after the caliper. Ford wants $64 CDN for this red(now pink) faded plastic twist lock. Guess I'll be yarding again soon wi… 1986 Ford Bronco - Thank goodness my buddy made me buy 12 brand new alan screws from the dealer last year. They came out easily with all the anti-seize lube o… 1986 Ford Bronco - Only one philips holds the next ring on. 1986 Ford Bronco - Digging this ring out is easier said than done. 1986 Ford Bronco - This however was easy to remove. 1986 Ford Bronco - This pulled out really easily with the alan screws to hold on to. 1986 Ford Bronco - After drifting out the 5 wheel lug studs, seperate the hub from the rotor with a cold chisel, hammer and finese(if you're changing the roto… 1986 Ford Bronco - If the guy who invented this bearing packer ain't up for sainthood, he ought to get a knighthood or something. It's great. 1986 Ford Bronco - The socket on the right is the one for our Ford's. The one on the left claims to do Bronco's but it just ain't so ! 1986 Ford Bronco - With my kind of 1986 Dana 44 manual hub bearings they wanted 70lbs to seat them, then back off a 1/4 turn and re-torque to 15-20 ft/lbs. 1986 Ford Bronco - After the bearing lock nut is torqued, clean out the remaining grease and coat everything in anti-seize. That's what works up here at -45,…