SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1980–1986/ “Eddie Bauer”/ Fuel filter for 85-86 supermotors.net/registry/4970/19796

Album section

Fuel filter for 85-86

From 1986 Ford Bronco “Eddie Bauer” — documented by Sixlitre.

10 photos
← Back to this vehicle
1986 Ford Bronco - This filter goes inside a screw on cannister lid under the driver on the frame rail. It's peculiar to just the 85-86 EFI'd 302, as later on… 1986 Ford Bronco - On 85 and 86s this is your fuel filter housing. located on the inside of the frame rail under the driver's door. 1986 Ford Bronco - This is the way the filter should be loaded into the lid. 1986 Ford Bronco - Here's the filter housing without the lid. 1986 Ford Bronco - You don't need sealant or grease on the threads or anything on the threads to seal it. All you need are really, really clean threads. 1986 Ford Bronco - Then you just need a new O-ring. If you look carefully you'll actually see an O-ring already in the groove of the lid. 1986 Ford Bronco - The tiny screwdriver is resting on the O-ring in it's groove in the lid. 1986 Ford Bronco - If you overtighten the lid all you achieve is crushing the filter (like I did last time). Each time I change the filter I realize I don't n… 1986 Ford Bronco - This here is the oil breather filter. Many new Bronco owners overlook changing this. If you fail to change your PCV valve, or oil, often en… 1986 Ford Bronco - Alternate filter from CTC