SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Home/ Registry/ Ford/ Bronco/ 1980-1986/ 1985 Bronco/ Center Console Build supermotors.net/registry/10241/52538

Album section

Center Console Build

From 1985 Ford Bronco, documented by Warhammer.

33 photos
1985 Ford Bronco - Factory plastic piece of shit 1985 Ford Bronco - The lock broke on the plastic stock POS console, so I decided to build a (hopefully) better one. This is my first wood project since wood s… 1985 Ford Bronco - I just threw some dimensions down to figure out the board foot I was going to need for the Red Oak I am using for everything but the sides. 1985 Ford Bronco - I deviated from the template when I decided to cut the sides. This was mainly used to get the contour of the floor and transmission hump. 1985 Ford Bronco - This is 3/4" Birch plywood. I used a jigsaw to cut out the bottom and a band saw to cut the top. 1985 Ford Bronco - Just a close up of the drivers side. 1985 Ford Bronco - This is some scrap 3/4" X 3/4" Red Oak that will be used to screw the top panels on from underneath. I pre drilled with a 7/32" bit and use… 1985 Ford Bronco - Passenger side assembled, and waiting for sanding and finishing. 1985 Ford Bronco - Here's the front. 1985 Ford Bronco - And the drivers side 1985 Ford Bronco - This is the lid just resting on top. 1985 Ford Bronco - Another shot of the lid resting on top. 1985 Ford Bronco - A custom wooden center console, likely for a vehicle interior, is shown before finishing. 1985 Ford Bronco - Unfinished wooden center console with hinges, ready for installation. 1985 Ford Bronco - Cabinet hinges installed on a wooden panel, with a tape measure visible below. 1985 Ford Bronco - A custom wooden center console is shown, with its lid open, revealing some papers inside. 1985 Ford Bronco - This wooden center console appears to be a custom build, possibly for a vehicle interior. 1985 Ford Bronco - Minwax Color "Golden Oak #210B" 1985 Ford Bronco - Minwax Color "Golden Oak #210B" 1985 Ford Bronco - Minwax Color "Golden Oak #210B" 1985 Ford Bronco - Minwax Color "Golden Oak #210B" 1985 Ford Bronco - A wooden center console part is shown on a green cloth, with a tool visible on the cloth. 1985 Ford Bronco - Custom wooden center console build with openings for components, placed on a green cloth. 1985 Ford Bronco - A custom wooden center console with cutouts for cup holders is shown. 1985 Ford Bronco - Here's the cupholders and aux. cigarette lighter installed 1985 Ford Bronco - Shot of the Passenger side 1985 Ford Bronco - Shot of the Drivers side 1985 Ford Bronco - I made sure there was no problems getting the transfer case into 4 Low 1985 Ford Bronco - Two small brackets I had in the garage that originally went to who knows what (????) 1985 Ford Bronco - Mounted to the bottom with a hole or two drilled in them 1985 Ford Bronco - Used OEM bolts and original mounting holes 1985 Ford Bronco - All covered up by the floor 1985 Ford Bronco - Factory piece of shit # 2