SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Crown Victoria/ 1998-2011/ “Jade”/ Misc supermotors.net/registry/1061/7624

Album section

Misc

From 1998 Ford Crown Victoria “Jade”, documented by RocketCouch.

355 photos 2 videos
← Back to this vehicle
1998 Ford Crown Victoria - Multi-panel sale listing for a Delco/GM CD car stereo head unit, showing front face, side bracket, wiring outlet and harness with text. 1998 Ford Crown Victoria - used aluminum throttle body assembly with attached position sensor and linkage, photographed on light carpet. 1998 Ford Crown Victoria - Seven people in white t-shirts and jeans pose smiling beside a dark sedan in a parking lot at dusk. 1998 Ford Crown Victoria - red Ford Focus three-door hatchback with multi-spoke wheels parked on pavement, with hills and a transmission tower behind. 1998 Ford Crown Victoria - Side profile of a red three-door Ford hatchback parked near a low industrial building with mountains in the background. 1998 Ford Crown Victoria - dark blue Ford Crown Victoria sedan photographed front three-quarter at night under lights in a parking lot. 1998 Ford Crown Victoria - automotive piston with visible ring grooves attached to a connecting rod, laid on a white surface with a paper beneath. 1998 Ford Crown Victoria - bare-metal Vortech centrifugal supercharger, its impeller and inlet snout visible, resting on a tiled floor. 1998 Ford Crown Victoria - Paxton centrifugal supercharger sits on a display surface, the cast PAXTON name visible across its inlet tube. 1998 Ford Crown Victoria - Novi 2000 centrifugal supercharger with a toothed drive pulley and inlet snout, shown against a black background. 1998 Ford Crown Victoria - small black electronic tuning module circuit board bearing chips, headers and a logo sticker, on a wood surface. 1998 Ford Crown Victoria - underside of a black tuning module board with a card-edge connector, marked with the text www.diablosport.com. 1998 Ford Crown Victoria - black Superchips tuning module with a barcode label and gold card-edge connector, lying on a light wood surface. 1998 Ford Crown Victoria - hand holds a black-edged module with a blue metallic face embossed with the word Superchips. 1998 Ford Crown Victoria - Two machined aluminum brackets with chamfered edges and slotted mounting holes, resting on a light wood surface. 1998 Ford Crown Victoria - pair of thick brushed-aluminum spacer blocks with oval slotted holes, stacked on a light wood surface. 1998 Ford Crown Victoria - black cylindrical Splitfire sensor with an attached cable and a yellow protective cap, lying beside a magazine. 1998 Ford Crown Victoria - rear of a Ford car stereo head unit, showing its metal chassis, amp module and multiple wiring connectors. 1998 Ford Crown Victoria - rear of a Ford car stereo head unit, showing its metal chassis, amp module and multiple wiring connectors. 1998 Ford Crown Victoria - Side-rear view of a Ford car stereo chassis on a white cloth, with the number 9843 written on a label. 1998 Ford Crown Victoria - front face of a Ford cassette car stereo with a volume knob, AM/FM, tape, Dolby NR and numbered preset buttons. 1998 Ford Crown Victoria - Side view of a car stereo's metal chassis showing the finned cassette mechanism and mounting brackets on a white cloth. 1998 Ford Crown Victoria - metal-cased automotive electronic control module showing two large black multi-pin wiring harness connectors on a white cloth. 1998 Ford Crown Victoria - Close-up of a Ford component label marked XW3F-18C870-AE, Made in Mexico, with barcode and Dolby noise-reduction licensing text. 1998 Ford Crown Victoria - Rear view of a bright yellow Ford Crown Victoria with a custom spoiler, dual chrome quad exhaust tips and a REELONE plate at an outdoor car… 1998 Ford Crown Victoria - bright yellow customized Ford Crown Victoria with a chrome supercharger scoop through the hood and chrome wheels, parked beside other cars… 1998 Ford Crown VictoriaVideo 1998 Ford Crown Victoria - Under the hood of a vehicle showing a modified engine with a red cone air filter, braided lines and a blue washer fluid bottle nearby. 1998 Ford Crown Victoria - Engine bay of a white car fitted with a twin-turbo V8, polished intake, braided blue lines and a front-mounted aluminum cooler. 1998 Ford Crown Victoria - highly polished V8 engine topped with a dual-quad carburetor and chrome headers sits in a glossy black-painted engine bay. 1998 Ford Crown Victoria - Front quarter of a dark metallic purple car with hood open showing a carbureted V8, paired with a chrome five-spoke wheel and drag tire. 1998 Ford Crown Victoria - silver Fox-body Ford Mustang LX coupe with chrome drag-style wheels parked at dusk near RVs and other vehicles. 1998 Ford Crown Victoria - white Ford Crown Victoria covered in sponsor decals including BBS, Tokico and Goodyear, parked with a red mini bike at an outdoor event. 1998 Ford Crown Victoria - black Ford Focus hatchback with PowerHouse decals and black wheels parked at a dusk motorsport event with a police car behind. 1998 Ford Crown Victoria - white Ford Crown Victoria with BBS, Tokico and Kenny Brown decals surrounded by spectators at a dusk motorsport event. 1998 Ford Crown Victoria - coiled NAPA Belts/Hose premium V-ribbed serpentine belt, part number 080991, resting on a wooden surface. 1998 Ford Crown Victoria - Out-of-focus photo of a Gates product box label with belt dimensions, too blurry to classify as a document. 1998 Ford Crown Victoria - NAPA Premium V-Ribbed Belt box marked 081124 with a coiled black serpentine belt on a wooden table. 1998 Ford Crown Victoria - Out-of-focus photo of a parts box label with belt dimensions, too blurry to classify as a document. 1998 Ford Crown Victoria - tan automotive overhead dome/map light console with two clear lenses and lift tabs, resting on a fabric surface. 1998 Ford Crown Victoria - rear of a tan overhead dome light console showing the internal bulb sockets and a white multi-wire connector plug. 1998 Ford Crown Victoria - black plastic air cleaner intake housing beside a metal automotive control module bearing handwritten blue marker labels. 1998 Ford Crown Victoria - black plastic automotive trim panel or splash-shield bracket with mounting tabs, lying on carpet. 1998 Ford Crown Victoria - Two used seat belts with tan webbing, latch plates, and a yellow-tipped buckle laid out on beige carpet. 1998 Ford Crown Victoria - gray Ford Mustang notchback coupe with Ford badge sits in a residential driveway near a white pickup truck. 1998 Ford Crown Victoria - Underside of a vehicle showing a polished rear differential cover, exhaust piping, and a bare foot in the background. 1998 Ford Crown Victoria - wooden home office desk with a flat monitor displaying a flamed hot rod, keyboard, printer and a blue model car. 1998 Ford Crown Victoria - Dell flat-panel monitor on a desk shows a flame-painted classic car as wallpaper, flanked by keyboard, pens and papers. 1998 Ford Crown Victoria - Two blue anodized aluminum extruded rails with mounting holes lie on bubble wrap beside a bag of hardware on a checkered rug. 1998 Ford Crown Victoria - pair of blue anodized aluminum rails with drilled holes rest on bubble wrap next to a bag of mounting hardware on a checkered rug. 1998 Ford Crown Victoria - polished aluminum racing wheel with a multi-hole face and red lug-hole accents stands against a wall in dim lighting. 1998 Ford Crown Victoria - Close-up of a polished aluminum Weld racing wheel face showing the lug pattern, lightening holes, red accents, and stamped markings. 1998 Ford Crown Victoria - Side view of a polished aluminum wheel barrel with a black outer lip and a red warning label, photographed on a concrete floor. 1998 Ford Crown Victoria - Weld Racing product box spec label listing Draglite wheel size, bolt pattern, offset, and part number. 1998 Ford Crown Victoria - Close-up of a polished aluminum Weld wheel center with red lug-hole accents and stamped markings around the hub bore. 1998 Ford Crown Victoria - Close-up of a polished aluminum wheel center with red lug-hole accents, mounted with a tire visible behind it. 1998 Ford Crown Victoria - silver steel racing wheel with a vented multi-hole center and small black-and-red decals rests on a cardboard surface. 1998 Ford Crown Victoria - framed BFGoodrich tire advertisement poster shows a red modified Mustang coupe against a fiery background, with tires lined up below. 1998 Ford Crown Victoria - red suede Bride reclining bucket racing seat stands on carpet in a room with chairs and a poster in the background. 1998 Ford Crown Victoria - Close-up of a red suede Bride racing seat back showing the white BRIDE logo above the harness pass-through opening. 1998 Ford Crown Victoria - Front view of a red suede Bride bucket racing seat showing the white BRIDE logo and the shoulder harness pass-through slot. 1998 Ford Crown Victoria - Lower rear view of a red suede racing seat showing the seat back and mounting base resting on carpet indoors. 1998 Ford Crown Victoria - Ford Racing Performance Parts box labeled M-9593-A302 24# Injector Kit (8) sits on a counter near a checkered-flag backdrop. 1998 Ford Crown Victoria - pair of red-and-orange Aeromotive inline fuel pumps displayed on a table beside their white shipping boxes. 1998 Ford Crown Victoria - Business repair invoice from Aeromotive Inc.; an invoice document not matching any technical-document type. 1998 Ford Crown Victoria - Engine bay of a vehicle showing a V8 with black plastic intake covers, air intake tube and accessory components. 1998 Ford Crown Victoria - black molded plastic air intake/airbox assembly with inlet snorkel photographed on a white background. 1998 Ford Crown Victoria - aluminum throttle body with a brass bore and a black sensor attached, shown at an angle on a tan surface. 1998 Ford Crown Victoria - Overhead view of an aluminum throttle body showing the brass bore, butterfly plate and an attached black sensor. 1998 Ford Crown Victoria - Aluminum throttle body viewed from above with closed butterfly plate, mounting holes and a side electrical connector. 1998 Ford Crown Victoria - hand holds a part showing the black molded underside of a throttle/sensor housing with internal ribs and bosses. 1998 Ford Crown Victoria - digital caliper reads 70.58 mm while measuring the bore of a metal throttle-body part alongside a steel ruler. 1998 Ford Crown Victoria - silver aluminum throttle body is held against a ruler while a digital caliper displays a 70.00 mm measurement. 1998 Ford Crown Victoria - silver aluminum throttle body rests on a ruler as a digital caliper shows a 68.34 mm reading. 1998 Ford Crown Victoria - large aluminum twin-bore throttle body with its butterfly blades visible lies on a light surface. 1998 Ford Crown Victoria - Close-up of a throttle body with the butterfly plate open inside the bore, held by hand over a white surface. 1998 Ford Crown Victoria - throttle body held in hand, showing the open butterfly valve and bolt-hole flange in detail. 1998 Ford Crown Victoria - Close-up of the dark plastic gear-cover side of a throttle body assembly held in hand. 1998 Ford Crown Victoria - throttle body bore being measured with a digital caliper, the display reading visible at the bottom. 1998 Ford Crown Victoria - surreal black-and-white X-ray-style image shows a human skull with a clock face and mechanical gears where the brain would be. 1998 Ford Crown Victoria - bare cast-aluminum lower intake manifold lies on a plywood workbench beside a green gasket and assorted tools. 1998 Ford Crown Victoria - underside of a cast-aluminum intake manifold sits on a black perforated rubber mat with a green gasket nearby. 1998 Ford Crown Victoria - freshly finished aluminum intake manifold stands on edge on a workbench, a cordless drill and spray can visible in the background. 1998 Ford Crown Victoria - silver aluminum intake manifold sits installed on a V engine, fitted with bright orange fuel injectors and surrounding wiring. 1998 Ford Crown Victoria - A set of automotive dipsticks and probes is shown next to a tape measure for scale. 1998 Ford Crown Victoria - A car antenna is shown in its packaging alongside a measuring tape. 1998 Ford Crown Victoria - A slim chrome antenna mast in a clear plastic blister package laid on dark fabric, with a threaded base and a stepped tapered tip. A yellow… 1998 Ford Crown Victoria - A silver Mercedes-Benz sedan is seen from the rear on a road with trees lining the sides. 1998 Ford Crown Victoria - Rear view of a silver Mercedes-Benz CLS 55 AMG sedan with distinctive taillights and quad exhaust pipes. 1998 Ford Crown Victoria - Collection of Auto Meter gauges, including a tachometer, fuel, water, and oil pressure gauges, all in their boxes. 1998 Ford Crown Victoria - A new Auto Meter fuel pressure gauge is displayed in its retail box, ready for installation. 1998 Ford Crown Victoria - A close-up of an Auto Meter boost gauge, indicating its function and brand. 1998 Ford Crown Victoria - An Auto Meter water temperature gauge is shown in its yellow retail packaging, alongside other Auto Meter gauges. 1998 Ford Crown Victoria - Auto Meter Phantom tachometer gauge, part number 5899, shown in its original packaging. 1998 Ford Crown Victoria - This Auto Meter Quick-Lite Shift Lite is packaged in yellow and includes a mounting bracket. 1998 Ford Crown Victoria - An Auto Meter oil pressure gauge is displayed in its retail packaging. 1998 Ford Crown Victoria - An unusual X-ray image shows a turbocharger superimposed over a human skull. 1998 Ford Crown Victoria - A polished aluminum Accufab twin-bore throttle body sitting on bubble wrap in front of its white box, with the brand name machined into the… 1998 Ford Crown Victoria - A close-up view of a throttle body, a component of the engine's air intake system. 1998 Ford Crown Victoria - Close-up of an Accufab throttle body, a car part, against a black background. 1998 Ford Crown Victoria - This image shows a Steeda air intake kit, including a blue air filter, intake tube, and installation instructions with decals. 1998 Ford Crown Victoria - K&N cold air intake kit components including filter, tube, and hardware. Box is labeled 'Lightning Harley Cold Air Kit'. 1998 Ford Crown Victoria - A new fuel pump and filter are shown in their packaging, with part numbers GCA719-2 and 125-157 visible. 1998 Ford Crown Victoria - An auxiliary idler kit for a 1999-2003 Ford Lightning is laid out with its instructions and hardware. 1998 Ford Crown Victoria - A Granatelli Motorsports ignition coil with a blue boot sits next to its packaging and instructions. 1998 Ford Crown Victoria - A new Auto Meter Phantom mechanical boost/vacuum gauge still sealed in its yellow retail box, reading 30 in-Hg vacuum to 20 psi boost with… 1998 Ford Crown Victoria - An Auto Meter oil pressure gauge is shown inside its retail packaging against a black background. 1998 Ford Crown Victoria - Three packages of Auto Meter green LED replacement kits are displayed against a dark background. 1998 Ford Crown Victoria - This Auto Meter fuel pressure gauge is shown in its original yellow retail packaging. 1998 Ford Crown Victoria - Canton aluminum coolant expansion tank with fittings and mounting bracket. Box is also visible. 1998 Ford Crown Victoria - A custom aluminum coolant overflow tank is shown against a black background, with a Canton Racing Products box in the upper portion of the… 1998 Ford Crown Victoria - An aluminum coolant overflow tank with brass fittings and a mounting bracket is shown against a dark background. 1998 Ford Crown Victoria - A supercharger and associated installation manuals are shown inside a cardboard box, with a Kenne Bell label on an envelope. 1998 Ford Crown Victoria - New supercharger unit and associated documentation are shown inside a shipping box. 1998 Ford Crown Victoria - A new cast-aluminum supercharger/compressor unit sitting in its shipping box on plastic wrap and foam packing, finned housing still bare me… 1998 Ford Crown Victoria - A supercharger part is shown with a warning label detailing installation instructions and potential damage. 1998 Ford Crown Victoria - The DiabloSport Predator tuner and its user manual are shown, designed for Ford SVT Supercharged vehicles. 1998 Ford Crown Victoria - A welded aluminum Canton Racing supercharger intercooler coolant tank with brass elbow fittings, a billet filler cap and embossed Canton lo… 1998 Ford Crown Victoria - A hand is shown holding an aluminum coolant overflow tank with a "CANON" logo etched on its side. 1998 Ford Crown Victoria - Custom aluminum coolant overflow tank with a threaded inlet and a drain valve. 1998 Ford Crown Victoria - A Steeda Oil Separator Kit, part number 555-3710, is shown with its packaging and installation instructions. 1998 Ford Crown Victoria - Metco Motorsports driveshaft safety loop kit, includes instructions and mounting hardware. 1998 Ford Crown Victoria - Photograph of Steeda Tri-Ax shifter retail boxes showing part numbers, not a technical document. 1998 Ford Crown Victoria - A silver shifter mechanism is shown with its installation instructions and hardware, packaged in bubble wrap. 1998 Ford Crown Victoria - Automatic transmission removed from a vehicle, resting on a concrete floor. 1998 Ford Crown Victoria - Side view of an aluminum automatic transmission extension housing cast with the Ford oval and part number RF-F3LP-7A040-AA, resting on card… 1998 Ford Crown Victoria - Rear view of an automatic transmission sitting on the garage floor with the tailshaft housing pointing at the camera, showing the splined o… 1998 Ford Crown Victoria - Close-up of a metal part with a label showing part numbers and a barcode. 1998 Ford Crown Victoria - Close-up of a rusty torque converter and transmission bell housing assembly. 1998 Ford Crown Victoria - Close-up of a used cast-aluminum automatic transaxle or transmission case laid on a blue surface, showing bolt studs, a black plastic senso… 1998 Ford Crown Victoria - An automatic transmission is shown on a concrete surface, with boxes visible behind it. 1998 Ford Crown Victoria - An automatic transmission is shown resting on a concrete floor, with a blue vehicle in the background. 1998 Ford Crown Victoria - Automatic transmission with visible part number PKE-201. A blue car with COBRA lettering is in the background. 1998 Ford Crown Victoria - A used automatic transmission sits on a concrete floor, with part of a blue car bearing the word "COBRA" visible above it the background. 1998 Ford Crown Victoria - Website banner for a performance specialist, a logo and tagline with a car silhouette. 1998 Ford Crown Victoria - Two engine cylinder heads are shown, revealing their internal camshaft and timing chain mechanisms. 1998 Ford Crown Victoria - Disassembled engine cylinder heads showing internal components and timing chain mechanisms. 1998 Ford Crown Victoria - Two engine cylinder heads are shown, one a timing chain and sprockets, indicating internal engine components. 1998 Ford Crown Victoria - Engine cylinder heads with camshafts and timing chain components are laid out on a floor. 1998 Ford Crown VictoriaVideo 1998 Ford Crown Victoria - Cirkit Boss aux fuse-block circuit isolator wiring kit sealed in its retail blister package on a tan surface. 1998 Ford Crown Victoria - opened Cirkit Boss isolator kit laid out showing relays, color-coded wiring and a bag of mounting hardware. 1998 Ford Crown Victoria - clear automotive front corner lens assembly for a turn signal sits in a cardboard box with packaging. 1998 Ford Crown Victoria - tan automotive seat belt with a chrome push-button buckle and Ford-labeled webbing coiled on a tan surface. 1998 Ford Crown Victoria - Auto Meter Sport-Comp Monster pedestal tachometer with a black face reading 0-8 RPM x1000 and a shift light beside it. 1998 Ford Crown Victoria - angled view of an Auto Meter Sport-Comp Monster tachometer with its wiring harness and a yellow shift light. 1998 Ford Crown Victoria - silver Muscle Machines diecast panel-delivery hot rod with a chrome blown engine sticking through the hood, side view. 1998 Ford Crown Victoria - silver diecast panel-delivery hot rod model with a twin red-scoop blown engine, posed front-quarter on a shelf. 1998 Ford Crown Victoria - diecast coupe hot rod painted in the American flag with stars-and-stripes bodywork and a chrome engine, rear-quarter view. 1998 Ford Crown Victoria - diecast coupe hot rod painted with stars and stripes and a chrome blown engine, posed front-quarter on a glossy surface. 1998 Ford Crown Victoria - British racing green diecast sports coupe model with silver wheels, shown from a high front three-quarter angle. 1998 Ford Crown Victoria - British racing green diecast sports coupe model shown in full side profile with silver wheels on a tan surface. 1998 Ford Crown Victoria - Overhead view of a dark green die-cast model sports car with its doors and hood detached, exposing the engine bay. 1998 Ford Crown Victoria - silver and gold die-cast model of a boxy 4x4 utility truck, hood up, showing detailed chassis and engine components. 1998 Ford Crown Victoria - Rear-quarter view of a tan die-cast model of a boxy 4x4 crew-cab utility truck with a hard top and open pickup bed. 1998 Ford Crown Victoria - white-face speedometer gauge kit reading to 140 MPH, sealed in SpeedHut retail packaging labeled S1001. 1998 Ford Crown Victoria - black triple-gauge dashboard pod bezel laid out with a bag of mounting hardware and clamp brackets. 1998 Ford Crown Victoria - black molded dashboard gauge panel with three round gauge openings, shown with a hardware bag and mounting brackets. 1998 Ford Crown Victoria - polished Steeda Tri-Ax shifter assembly displayed next to its retail box labeled 555-7353, made in the USA. 1998 Ford Crown Victoria - Gray cloth interior of a Ford coupe showing the airbag steering wheel, manual shifter and a cluster of aftermarket gauges. 1998 Ford Crown Victoria - black-and-primer 1960s muscle car with a blower through the hood lays down a smoky burnout in a parking lot. 1998 Ford Crown Victoria - man leans on the trunk of a black-and-primer muscle car steadying it as the rear tires smoke in a burnout. 1998 Ford Crown Victoria - Open shipping box holding machined aluminum spacer rings, a bracket and bags of bolts and hardware on carpet. 1998 Ford Crown Victoria - Shipping box with a large polished aluminum mounting bracket, a steel spacer and several bags of black bolts and parts. 1998 Ford Crown Victoria - hand holds a black grooved aluminum ring pulley over a cardboard box lined with white and brown packing paper. 1998 Ford Crown Victoria - hand holds a cylindrical polished aluminum bearing/housing component above brown packing paper. 1998 Ford Crown Victoria - Close-up of a hand gripping a circular machined aluminum flange plate with multiple bolt holes and a center bore. 1998 Ford Crown Victoria - Two clear projector-style headlight assemblies in bubble wrap beside HID ballasts, wiring and an instruction sheet. 1998 Ford Crown Victoria - Pair of silver Philips XenDrive HID ballast control units laid on dark cloth with blue bulb connectors. 1998 Ford Crown Victoria - loomed black-and-red automotive wiring harness with plug connectors above a sealed bag containing a second harness. 1998 Ford Crown Victoria - Cover page of an XGL Headlamps HID upgrade-kit instruction manual and information package. 1998 Ford Crown Victoria - Side view of an aftermarket pedestal-mount tachometer with silver bezel, yellow sun-shade and a colored wiring harness. 1998 Ford Crown Victoria - Aftermarket pedestal tachometer showing its black RPM dial face with shift-light and adjustment knobs. 1998 Ford Crown Victoria - hand holds the back of a pedestal tachometer, displaying its wiring harness and mounting bracket. 1998 Ford Crown Victoria - hand holds a pedestal-mount tachometer with yellow visor and exposed red, green and black wiring. 1998 Ford Crown Victoria - Combustion-chamber face of an aluminum overhead-cam cylinder head resting on packaging. 1998 Ford Crown Victoria - Aluminum cylinder head showing rocker arms, cam caps and a timing chain with sprockets. 1998 Ford Crown Victoria - Aluminum upper and lower intake manifold with throttle body and fuel lines laid out on packaging. 1998 Ford Crown Victoria - Aluminum Ford intake manifold assembly stamped '5.0L V8' with attached throttle body and wiring. 1998 Ford Crown Victoria - Aluminum lower intake manifold with fuel rails, injector ports and braided lines on a cardboard surface. 1998 Ford Crown Victoria - Aluminum lower intake manifold with six open runner ports, fuel rail and engine wiring on cardboard. 1998 Ford Crown Victoria - Inside view of a removed engine oil pan with sealant on the rail edges, laid on a concrete floor. 1998 Ford Crown Victoria - cast rear lower control arm with chipped paint and a press-in bushing, lying on a concrete floor. 1998 Ford Crown Victoria - rear suspension control arm with twin bushings and a ball-joint stud, weathered paint, on concrete. 1998 Ford Crown Victoria - black-painted stamped-steel suspension control arm with mounting bushings and a ball joint, lying on a concrete garage floor. 1998 Ford Crown Victoria - removed engine wiring harness with fuel rails beside a white plastic intake manifold, laid out on a concrete floor. 1998 Ford Crown Victoria - Close-up of an engine's intake ports and fuel rails with electrical injector connectors and wiring during disassembly. 1998 Ford Crown Victoria - vehicle engine wiring harness wrapped in cloth tape, ending in two grey multi-pin electrical connectors over an aluminum casting. 1998 Ford Crown Victoria - removed engine wiring harness with relay and fuel rails lying next to the open intake ports of a manifold on the floor. 1998 Ford Crown Victoria - inside of a removed engine oil pan with windage baffles and brown oil residue, held up beside loose wiring. 1998 Ford Crown Victoria - grey aluminum intake manifold with eight open runner ports and an attached throttle body sitting on a concrete floor. 1998 Ford Crown Victoria - throttle body with an idle air control valve and electrical connector mounted to a grey intake manifold on the floor. 1998 Ford Crown Victoria - black-painted upper suspension control arm with a ball joint and pivot bushings, paint chipped, on a concrete floor. 1998 Ford Crown Victoria - weathered suspension control arm with peeling paint, a center ball joint and a rusted pivot shaft, on concrete. 1998 Ford Crown Victoria - suspension control arm with two ball joints and chipped black paint resting on a concrete floor near a red jack. 1998 Ford Crown Victoria - Polished tubular rear-axle housing components mounted on yellow jack stands in a workshop, with a step stool nearby. 1998 Ford Crown Victoria - Close-up of a freshly glossy red-painted vehicle frame bracket with a cupped recess and center hole. 1998 Ford Crown Victoria - glossy red-painted vehicle frame rail and crossmember section raised on a shop lift, with a steering tie rod visible. 1998 Ford Crown Victoria - glossy red-painted frame crossmember with a cupped bracket and brake hardware, viewed from below on a shop lift. 1998 Ford Crown Victoria - glossy red-painted X-member chassis fitted with coilover shocks, raised on blue two-post lift arms in a busy garage. 1998 Ford Crown Victoria - Blue powder-coated tubular suspension arms beside polished axle housing components on a garage floor near a parts box. 1998 Ford Crown Victoria - blue anodized billet short-throw shifter assembly with a bent steel shift stick, mounted on a base plate on a white table. 1998 Ford Crown Victoria - B&M short-throw shifter installation-instruction sheet for 1983-2003 Mustangs with step-by-step text and a figure. 1998 Ford Crown Victoria - Side view of a blue anodized billet short-throw shifter with a bent stick, ball pivot and mounting plate on a white surface. 1998 Ford Crown Victoria - printed magazine feature page titled about an old-school build, showing a supercharger inset and a white four-door sedan. 1998 Ford Crown Victoria - magazine page showing a white four-door sedan in motion on pavement, overlaid with the headline text 'FULLSIZE TIRE FRYER'. 1998 Ford Crown Victoria - magazine article page picturing a supercharged engine bay with a 'Fossil Fuels Are Yummy' decal inset and body close-up. 1998 Ford Crown Victoria - magazine page showing a cloth-seat sedan interior with a console shifter, plus a white four-door sedan parked outdoors. 1998 Ford Crown Victoria - aluminum V8 cylinder head standing on edge, showing four three-valve combustion chambers with intake and exhaust valves. 1998 Ford Crown Victoria - aluminum cylinder head rests deck-face-up on a dark carpet, showing machined ports and bolt holes. 1998 Ford Crown Victoria - Side view of an aluminum cylinder head with visible camshaft, valvetrain, and a row of exhaust ports. 1998 Ford Crown Victoria - aluminum cylinder head stands upright, exposing camshaft bearing caps and the valvetrain assembly. 1998 Ford Crown Victoria - Top-down view of an aluminum cylinder head revealing rocker arms, valve lifters, and numerous bolt holes. 1998 Ford Crown Victoria - Close view of a cylinder head's combustion-chamber side showing multiple valve seats per chamber. 1998 Ford Crown Victoria - Macro shot of two combustion chambers on a cylinder head, each with intake and exhaust valve seats. 1998 Ford Crown Victoria - cylinder head's chamber face is shown with valve seats while a second head sits blurred behind it. 1998 Ford Crown Victoria - pair of aluminum cylinder heads rest on a green cloth, one upright showing ports, one lying flat. 1998 Ford Crown Victoria - curved metal tube with a wrinkle-black coating and a barbed fitting lies on a worn red workbench. 1998 Ford Crown Victoria - Tubular black-coated control arms and mounting brackets, partly wrapped in plastic, on a red workbench. 1998 Ford Crown Victoria - Detail of black textured-finish brackets and a tubular arm partially covered in plastic wrap on red bench. 1998 Ford Crown Victoria - Close-up of multi-pin connector blocks in a fuse box showing burnt, melted black residue around a terminal. 1998 Ford Crown Victoria - Black fuse and relay socket panel removed from a vehicle, showing burnt melted plastic near a center terminal. 1998 Ford Crown Victoria - hand holds up a vehicle fuse box showing a charred connector beside wiring harnesses in the engine bay. 1998 Ford Crown Victoria - hand holds a black relay or module up from the engine bay near gray connectors and a red battery cable. 1998 Ford Crown Victoria - Inside view of a black fuse box housing with several metal studs and burnt residue between socket banks. 1998 Ford Crown Victoria - A bare aluminum fuel cell with blue AN bulkhead fittings and a red sender plate sits on a cardboard box, surrounded by red-anodized Aeromot… 1998 Ford Crown Victoria - A red anodized Aeromotive A1000 fuel pump on its mounting bracket, sitting on a cardboard box next to a welded aluminum fuel cell or tank w… 1998 Ford Crown Victoria - A hand steadies a red anodized Aeromotive inline fuel filter marked with a FLOW arrow on a cardboard box, with its disassembled housing and… 1998 Ford Crown Victoria - Product photo of a Moroso battery disconnect switch and Off/On placard, not a technical document. 1998 Ford Crown Victoria - Product photo of a SpeedWare white-face gauge kit in packaging, not a technical document. 1998 Ford Crown Victoria - Photograph of valve covers hung on a pegboard, not a technical document. 1998 Ford Crown Victoria - Product photo of a chrome master battery disconnect switch shown next to its red Moroso off/on label decal. 1998 Ford Crown Victoria - Retail product packaging photo of a SpeedWare white-face 140 MPH speedometer gauge kit, part S1001. 1998 Ford Crown Victoria - Product photo of Zoop Seal boxed metal sealant alongside a Zoop Shine metal polish bottle. 1998 Ford Crown Victoria - Several bottles of ZoopSeal car cleaning products are displayed on a white surface. 1998 Ford Crown Victoria - Several bottles of car cleaning products are displayed, with labels indicating different uses like tire shine and concentrate. 1998 Ford Crown Victoria - Several bottles of Zoop Seal products, including Final Sealer, are arranged on a white surface. 1998 Ford Crown Victoria - A pair of yellow medical gloves and a folded white cloth are laid out on a white surface, possibly for a cleaning or medical procedure. 1998 Ford Crown Victoria - Collection of Zoop Seal car care products, including tire and trim shine, and other detailing liquids. 1998 Ford Crown Victoria - Small sepia-toned forum signature banner showing two full-size Ford sedans parked side by side in front of a house, one angled front-on and… 1998 Ford Crown Victoria - A set of eight black fuel injectors laid out in a row on a plain white background, each with its side electrical connector, black upper O-r… 1998 Ford Crown Victoria - Eight fuel injectors are laid out on a white surface. 1998 Ford Crown Victoria - A garage floor covered with wheels mid-swap: several large chrome-lip split-style aftermarket wheels with low-profile tires laid out in the… 1998 Ford Crown Victoria - This modified Ford Mustang features a bright orange paint job and custom five-spoke wheels. 1998 Ford Crown Victoria - A close-up of a red car's fender and a custom wheel with red accents. 1998 Ford Crown Victoria - Sales/magazine cover of Super Ford March 1996 featuring Mustang feature articles and headlines. 1998 Ford Crown Victoria - Photograph of a black Edge Racing fuel injector with part numbers, resting on a wooden table. 1998 Ford Crown Victoria - Photograph of a black Edge Racing fuel injector showing markings, resting on a wooden table. 1998 Ford Crown Victoria - Photograph of a black fuel injector laid beside a tape measure to show its length. 1998 Ford Crown Victoria - Photograph of a hand holding the nozzle end of a fuel injector next to a tape measure. 1998 Ford Crown Victoria - Photograph of a hand holding the electrical connector end of a fuel injector next to a tape measure. 1998 Ford Crown Victoria - Photograph of a vehicle undercarriage showing exhaust piping and a transmission pan. 1998 Ford Crown Victoria - Photograph of an engine bay showing the exhaust manifold, oxygen sensor wiring, and a belt tensioner. 1998 Ford Crown Victoria - Photograph of an engine bay showing tubular headers, braided steel lines, and various hoses. 1998 Ford Crown Victoria - Photograph of an engine bay showing tubular headers and braided lines near a component label. 1998 Ford Crown Victoria - Photograph of an engine bay showing curved exhaust tubing, rubber hoses, and electrical connectors. 1998 Ford Crown Victoria - Photograph of an engine bay showing header tubing and a braided steel line beside a component label. 1998 Ford Crown Victoria - Close-up view of a turbocharger's compressor wheel. 1998 Ford Crown Victoria - A Vortech supercharger is shown, with its impeller and housing clearly visible. 1998 Ford Crown Victoria - A large turbocharger is shown with a hand obscuring part of the impeller. 1998 Ford Crown Victoria - Photograph of vinyl lettering decals with the paper backing partially peeled on a white surface. 1998 Ford Crown Victoria - Photograph of a vinyl lettering decal with its paper backing partly removed on a white surface. 1998 Ford Crown Victoria - Photograph of stacked vinyl lettering decals with paper backing partially peeled. 1998 Ford Crown Victoria - Photograph of vinyl lettering decals with red text and a partially peeled backing. 1998 Ford Crown Victoria - Photograph of stacked vinyl lettering decals with backing partly removed. 1998 Ford Crown Victoria - Photograph of multiple ADTR.net vinyl lettering decals in red and gray arranged on a light surface. 1998 Ford Crown Victoria - Close-up of an ADTR.net sticker on a vehicle's window. 1998 Ford Crown Victoria - A black police car sits on a dirt road under a cloudy blue sky, its emergency lights illuminated. 1998 Ford Crown Victoria - This black 1998 Ford Crown Victoria is equipped with a push bar and auxiliary lights. 1998 Ford Crown Victoria - A blue 1998 Ford Crown Victoria is shown from a low angle, highlighting its front grille and headlights. 1998 Ford Crown Victoria - Rear detail of a 1998 Ford Crown Victoria Police Interceptor, showing the taillight and a reflection. 1998 Ford Crown Victoria - A white sedan sits with its hood open, possibly at a drag strip, with racing information visible on the windshield. 1998 Ford Crown Victoria - A white 1998 Ford Crown Victoria sedan is parked on the side of a road with trees in the background. 1998 Ford Crown Victoria - A line of Ford Crown Victoria police cars are parked outside a NASA facility, with an SR-71 Blackbird aircraft displayed overhead. 1998 Ford Crown Victoria - Dramatic low ground-level 3/4 rear shot of a black Ford sedan wearing a "CROWN VICTORIA LX" badge on the trunk, with a large polished exhau… 1998 Ford Crown Victoria - A black 1998 Ford Crown Victoria is captured in motion on a two-lane road, with trees lining the side. 1998 Ford Crown Victoria - A 1998 Ford Crown Victoria Police Interceptor is shown from the rear quarter angle on a wet day. 1998 Ford Crown Victoria - Rolling three-quarter front shot of a light green Ford Crown Victoria sedan driving past a brick building, with motion-blurred background,… 1998 Ford Crown Victoria - Side view of a car in motion on a highway, with other vehicles visible ahead. 1998 Ford Crown Victoria - A person holds a black pulley, a component likely from a vehicle's engine system. 1998 Ford Crown Victoria - A black automotive pulley with a rubber seal is held in a person's hand. 1998 Ford Crown Victoria - AP Racing brake caliper and rotor kit shown with an inset view of the caliper. 1998 Ford Crown Victoria - A car's automatic transmission shifter assembly is shown removed from its vehicle. 1998 Ford Crown Victoria - Disassembled automatic transmission shifter assembly with visible wiring and mechanical components. 1998 Ford Crown Victoria - A detached gear shifter assembly, a black leather-topped shift knob and intricate mechanical linkages, is displayed against a blue carpeted… 1998 Ford Crown Victoria - Two underdrive pulley sets are shown packaged in their original Steeda Parts boxes. 1998 Ford Crown Victoria - New Steeda Parts pulleys for a Mustang GT 4.6L are shown in their original packaging. 1998 Ford Crown Victoria - Two boxes of Steeda overdrive pulley sets are shown, each containing a pulley. 1998 Ford Crown Victoria - Two Steeda branded automotive parts are shown in their original packaging. 1998 Ford Crown Victoria - dark gray vehicle front grille with a center oval emblem laid on bubble wrap atop a workbench against a blue wall. 1998 Ford Crown Victoria - polished aluminum slotted mag wheel fitted with a drag-style tire on a dark green car, parked on asphalt. 1998 Ford Crown Victoria - used engine flywheel with its toothed ring gear and bolted center hub, propped against wood on a shop floor. 1998 Ford Crown Victoria - worn clutch disc beside a pressure plate with sprung center hub, laid on a concrete floor near a flywheel. 1998 Ford Crown Victoria - flywheel with a starter ring gear and an installed threaded alignment stud rests on a shop floor beside a worn clutch friction disc. 1998 Ford Crown Victoria - Close-up of the polished back face of a flywheel or pressure plate showing bolt holes, a paper label, and faint handwritten markings. 1998 Ford Crown Victoria - aluminum flywheel with a pressed-on steel starter ring gear and a bolted central crank flange sits on a red shop floor. 1998 Ford Crown Victoria - Two clutch friction discs with splined center hubs and sprung damper centers lie on a shop floor next to a metal part. 1998 Ford Crown Victoria - clutch pressure plate viewed from the diaphragm side, its spring fingers coated with red paint, lying on a shop floor. 1998 Ford Crown Victoria - hand holds a worn metal clutch friction ring over a pile of clutch parts including pressure plates and discs on a shop floor. 1998 Ford Crown Victoria - clutch pressure plate cover with a diaphragm spring and traces of red paint sits assembled with a flywheel on a shop floor. 1998 Ford Crown Victoria - printed magazine page (Car Craft, June 2011) showing thread-insert repair steps and a sources listing. 1998 Ford Crown Victoria - printed magazine page with photos and captions describing a carbon-fiber throttle-body and intake project. 1998 Ford Crown Victoria - black automotive center console with its lid open, revealing the storage bin and cupholders, packed in a cardboard box. 1998 Ford Crown Victoria - finger points to a molded mounting tab and cupholder area inside a black plastic center console storage bin. 1998 Ford Crown Victoria - Close-up of the hinge and padded lid underside of a black automotive center console storage compartment. 1998 Ford Crown Victoria - complete black center console with padded armrest, cupholders and a vanity mirror lying in a cardboard box. 1998 Ford Crown Victoria - Underside of a center console assembly exposing blue foam padding, a mounting bracket and wiring. 1998 Ford Crown Victoria - automatic transmission shifter with handle and PRND21 gate plate removed from its console, with wiring attached. 1998 Ford Crown Victoria - Close-up of an automatic shifter assembly showing the PRND21 gate plate, internal springs and colored wiring. 1998 Ford Crown Victoria - removed automotive interior trim assembly held by hand, showing a metallic mesh panel and a cream plastic housing with old adhesive residue. 1998 Ford Crown Victoria - nocturnal animal with glowing reflective eyes sits in shadow beside a wall and pink oleander blossoms at night. 1998 Ford Crown Victoria - raccoon with bright reflective eyes crouches on a ledge surrounded by oleander foliage and pink flowers in a dim nighttime shot. 1998 Ford Crown Victoria - underside of a removed plastic center console held by hand, showing mounting points, a barcode sticker, and a blue handwritten CWT mark. 1998 Ford Crown Victoria - gray automotive center console section held by hand, featuring a padded armrest lid and a recess labeled POWER POINT. 1998 Ford Crown Victoria - gray plastic center console with an open cupholder is held up, its black underside marked CWT, above cardboard boxes in a storage area. 1998 Ford Crown Victoria - interior of a console base with coil springs, a white wiring connector, a lighter socket, and copper-toned bolt heads, pointed at by a fing… 1998 Ford Crown Victoria - pair of matching cast-aluminum mechanical housings with mounting flanges and protruding ports sit on a gray concrete floor. 1998 Ford Crown Victoria - sealed clear bag holds several black rubber or polyurethane bushings with metal sleeves, plus a bright yellow piece. 1998 Ford Crown Victoria - clear plastic bag filled with black and yellow polyurethane bushings and metal sleeves rests on a dark surface near a yellow label. 1998 Ford Crown Victoria - clear plastic bag holds an assortment of black and yellow polyurethane bushings with copper-colored metal sleeves. 1998 Ford Crown Victoria - clear bag of yellow and black polyurethane bushings and brass sleeves sits next to a yellow label reading WORLD'S, on a dark surface. 1998 Ford Crown Victoria - Several boxed Auto Meter automotive gauges, including a Dual Gauge Pod and round pressure gauges in clear-window packaging, arranged on a t… 1998 Ford Crown Victoria - bright yellow full-size four-door sedan with black tribal-flame decals sits on a lawn in front of a brick home, showing an Alabama plate. 1998 Ford Crown Victoria - website banner reading ADTR.net and ROCKETCOUCH featuring a maroon Ford sedan and a smoking white Crown Victoria. 1998 Ford Crown Victoria - close-up underbody shot of a rusted suspension arm and bushing fastener viewed from beneath a vehicle. 1998 Ford Crown Victoria - person holds a double-ended threaded stud with a hex shoulder in their palm above a greasy flanged part. 1998 Ford Crown Victoria - Stylized ADTR.net graphic with a red Ford sedan and a white Crown Victoria over the tagline Your Home For Panther Performance. 1998 Ford Crown Victoria - black T-shirt mockup showing ADTR.net front and back prints with a red sedan and white Crown Victoria design. 1998 Ford Crown Victoria - Engineering cross-section drawing of a wheel rim with dimensioned 'A', 'B radius' and 'C radius' callouts. 1998 Ford Crown Victoria - black pullover hoodie mockup with ADTR cartoon car artwork and a sleeve print reading ADTR.net. 1998 Ford Crown Victoria - Cartoon artwork of a white Crown Victoria doing a smoky burnout below bold ADTR letters and a tongue-in-cheek slogan. 1998 Ford Crown Victoria - cardboard box filled with fasteners individually wrapped in red protective mesh, beside ARP racing-products packaging. 1998 Ford Crown Victoria - black threaded ARP automotive racing fastener stud mounted on a yellow Professional Quality Fasteners blister card. 1998 Ford Crown Victoria - automatic shifter assembly with a black leather knob and chrome PRND21 gate bezel sitting on a concrete floor. 1998 Ford Crown Victoria - Top-down view of an automatic shifter's chrome gate bezel displaying the R N D 2 1 gear positions with leather boot. 1998 Ford Crown Victoria - automatic shifter unit viewed from above with chrome bezel, leather knob and a wiring label reading 1st Shift 1/23/02. 1998 Ford Crown Victoria - Side view of an automatic shifter assembly showing the leather knob, chrome PRND bezel and plastic base on concrete. 1998 Ford Crown Victoria - automatic shifter assembly with leather knob and chrome PRND21 bezel, the base carrying a printed wiring label. 1998 Ford Crown Victoria - pod of aftermarket gauges including a boost gauge near a car's center console, with exposed wiring and connectors. 1998 Ford Crown Victoria - underbody shot showing a hand using a cordless impact tool near an exhaust pipe and frame, lit by work light. 1998 Ford Crown Victoria - Rear side window of a dark sedan bearing a white 'ADTR.net' vinyl decal, with sky and trees reflected in the glass. 1998 Ford Crown Victoria - Black sedan marked '911' running an autocross course laid out with cones in a large stadium parking lot. 1998 Ford Crown Victoria - White Ford sedan with a front push bar and California plate, photographed from a low angle against a clear blue sky. 1998 Ford Crown Victoria - Silver and maroon sedans parked at an outdoor car meet, with people gathered near the vehicles under trees. 1998 Ford Crown Victoria - group of young men gather around the open hood of a blue pickup with a California plate in a parking-lot car meet. 1998 Ford Crown Victoria - black Ford sedan and a dark-blue Crown Victoria parked near a building while people stand around at an event. 1998 Ford Crown Victoria - Aluminum automatic belt tensioner assembly with its idler pulley, laid on a concrete floor. 1998 Ford Crown Victoria - set of Hawk brake pads next to their purple retail box labeled 'HB341F.618' on a dark surface. 1998 Ford Crown Victoria - Eight automotive fuel injectors with green O-rings and black connectors arranged in two rows on a dark surface. 1998 Ford Crown Victoria - Promotional banner advertising '10% Off & Free Shipping on ALL Stainless Works Products' beside a white sedan with exhaust parts. 1998 Ford Crown Victoria - fuel-tank sender hanger plate fitted with twin in-tank pumps and rubber feed lines resting on cardboard. 1998 Ford Crown Victoria - dual in-tank fuel pump module with looping hoses and spring clamps suspended from its hanger plate on cardboard. 1998 Ford Crown Victoria - hand holds an in-tank fuel pump assembly fitted with white foam baffle trays over a cardboard surface. 1998 Ford Crown Victoria - Bottom view of an in-tank fuel pump module showing twin cylindrical pumps and white foam baffles held over cardboard. 1998 Ford Crown Victoria - fuel pump hanger assembly with red and blue anodized AN fittings and braided lines clamped to a yellow workbench fixture. 1998 Ford Crown Victoria - Close-up of a fuel tank sender plate fitted with red and blue AN fittings and yellow protective caps above an intercooler. 1998 Ford Crown Victoria - Interior view of a fuel tank showing the white fuel pump and sender assembly with float arm installed in place.