PRP Racing seats

Premier Racing Products (PRP) suspension seats Owner PRP Racing seat Owner Mounting seat to passngr-side bracket. Not a direct fit, the seat tabs are farther apart than stock. Temporarily mounting seats to factory… Owner A 20" length of 2"x2"x1/8" angle iron was used to mount seats to factory bracket. Only one side is shown here with the "adapter". I rounded… Owner Another view of the angle iron. the holes for the passngr-side bracket also line up with the driver's -side bracket. Owner passngr-side seat bracket mounted to prp seat. This retains the flip-up feature. Owner Another view of the factory passngr-side seat mounting bracket bolted to the prp seat. angle iron notched for spring end sticking up near f… Owner Angle iron mounted to driver's-side seat brackets. I bent the middle up enough to clear the slide mechanism. Flat washers between the angle… Owner PRP seat mounted to barcket, driver's side. I only have 1" clearance from my head to the roof of the cab while seated. I'm 6'0" tall Owner View from driver's side of angle iron mounted to factory seat brackets Owner passngr-side view of angle iron mounted to factory seat brackets. Owner driver's-side view of PRP seats mounted Owner passngr-side view of PRP seats mounted. The flip-up seat hits the roof well before getting near the winshield Owner seats now mounted to rollcage using custom crossmembers Owner The interior of a vehicle features racing seats and a roll cage, with another truck visible through the window. AI caption