IMG_1219.JPG
264 hits | 56.87 KB | Posted: 10/1/13
Replace 89 Bronco Turn Signal Switch - Take a look at my Tilt Wheel section - http://www.supermotor...

IMG_1217.JPG
245 hits | 61.15 KB | Posted: 10/1/13
That's the connector at the end of the wires. How's that get back up the tight steering column the ...

IMG_1210.JPG
263 hits | 40.23 KB | Posted: 10/1/13
I also took a bunch of pics of the new one as well as not to screw up the order.

IMG_1214.JPG
253 hits | 50.25 KB | Posted: 10/1/13
What I want to show you here is not in the pic...You'll see a curved, red piece of plastic in the mi...

IMG_1223.JPG
258 hits | 46.91 KB | Posted: 10/1/13
Preparing the new wires for snaking down the column. I used some, I believe, 12 gauge wire. Wrap t...

IMG_1220.JPG
258 hits | 71.32 KB | Posted: 10/1/13
I decided to do only half at a time, instead of pulling and yanking all down at once and risk damagi...

IMG_1224.JPG
258 hits | 77.66 KB | Posted: 10/1/13
All wires are pulled through

IMG_1227.JPG
265 hits | 59 KB | Posted: 10/1/13
The black sleve / sheild you pulled off the old set of wires...put it back on the new one. I assume...

IMG_1226.JPG
272 hits | 54.06 KB | Posted: 10/1/13
New switch in column. Put the two screws in, plus the screw holding down the ground block. It's th...