SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Home/ Registry/ Ford/ Bronco/ 1987-1991/ 1988 Bronco/ TTB Lift 3/07 supermotors.net/registry/17099/58139

Album section

TTB Lift 3/07

From 1988 Ford Bronco, documented by TheRics88Bronco.

35 photos
1988 Ford Bronco - i used a broom for height differences 1988 Ford Bronco - first leaf off had to use an oxygen/acetelyn torch 1988 Ford Bronco - first new lifted leaf on, i painted the drum 1988 Ford Bronco - a cool view of the back left 1988 Ford Bronco - first new lifted leaf on, i painted the drum 1988 Ford Bronco - had to keep some wood under the pumpkin to get the jack back under the axle a little easier...sway bar disconnected 1988 Ford Bronco - passenger side leaf on 1988 Ford Bronco - shocks off new leafs on sway bar still disconnected 1988 Ford Bronco - new brake lines shocks on leafs on brakeline was cut..had to relocate the new one pinion angle now so rough 1988 Ford Bronco - this bolt broke but luckily had a new 3/4 20 to go in its place 1988 Ford Bronco - the other half of the bolt...about 2 hours to get it out i had to weld a new bolt around the old threaded part, luckily there was enough th… 1988 Ford Bronco - back all done, now a little ways into the front half 1988 Ford Bronco - my friend workin on it..my snap-on tool box in the back ground, and a bottle of DOT 3 brake fluid 1988 Ford Bronco - drive shaft disconnected radious arm bracket removed coil and shocks out of tower and tower painted black 1988 Ford Bronco - radious arm bracket almost off spring and shocks removed warn hubs and an i-beam drop bracket i actually spent 4.5 hours cleaning underneat… 1988 Ford Bronco - sway bar disconnected axle laying on the floor drive shaft hanging out old i-beam brackets removed, not as bad as i thought it would be 1988 Ford Bronco - new i-beam drop brackets on new pit man arm on axle on the ground brake lines disconnected always use jack stands 1988 Ford Bronco - sway bar disconnected axle laying on the floor drive shaft hanging out old i-beam brackets removed, not as bad as i thought it would be 1988 Ford Bronco - new i-beam drop brackets on new pit man arm on axle on the ground brake lines disconnected always use jack stands 1988 Ford Bronco - just another view of everything bolted up, and axle laying on the ground 1988 Ford Bronco - driver side getting close to be done extended radious arm on shock on needing to cut off the sway bar link mounting point 1988 Ford Bronco - just another view...drivers side 1988 Ford Bronco - that does not look right at all..haha 1988 Ford Bronco - dont worry i have all of my shocks on it, i didnt have 4 at the time..but that sway bar mount has to go! 1988 Ford Bronco - tony doing something??? 1988 Ford Bronco - getting closer 1988 Ford Bronco - almost done about 12:30am or so...75% done 1988 Ford Bronco - passenger side.. shock on spring on just about ready to drive out the door 1988 Ford Bronco - DONE NOTICE THE BROOM 1988 Ford Bronco - all of the shock on 1988 Ford Bronco - a day time shot 1988 Ford Bronco - sway bar will stay off....forever 1988 Ford Bronco - yea, thats how much the rear sway bar will be at all times, so i can take the bolt off with my fingers 1988 Ford Bronco - Close-up of a vehicle's undercarriage, focusing on the suspension and a large off-road tire. The registry claims it is a 1988 Ford Bronco,… 1988 Ford Bronco - mangled brush guard from jc whitney...the lights are still in so i have no worries!