Today we move the tie rod to above the knuckle.
Knuckle Under 006.jpg
1426 hits | 59.39 KB | Posted: 7/6/03

Today we move the tie rod to above the knuckle.
See the real steep angle on the drivers side with the 6" lift
Knuckle Under 007.jpg
1576 hits | 81.52 KB | Posted: 7/6/03

See the real steep angle on the drivers side with the 6" lift
Pretty dark pic, but it is up on the stands and ready to go
Knuckle Under 011.jpg
1253 hits | 78.18 KB | Posted: 7/6/03

Pretty dark pic, but it is up on the stands and ready to go
Top of the hole before we mess with it.
Knuckle Under 013.jpg
1298 hits | 62.98 KB | Posted: 7/6/03

Top of the hole before we mess with it.
Drill setup with the tapered reamer
Knuckle Under 015.jpg
1374 hits | 98.93 KB | Posted: 7/6/03

Drill setup with the tapered reamer
Goodson tapered reamer
Knuckle Under 016.jpg
1342 hits | 66.23 KB | Posted: 7/6/03

Goodson tapered reamer
Passenger side on top
Knuckle Under 020.jpg
1301 hits | 73.58 KB | Posted: 7/6/03

Passenger side on top
Drivers side on top
Knuckle Under 023.jpg
1408 hits | 62.83 KB | Posted: 7/6/03

Drivers side on top
We wrapped some emery cloth around the bit to clean up the chatter a little bit
Knuckle Under 031.jpg
1302 hits | 54.55 KB | Posted: 7/6/03

We wrapped some emery cloth around the bit to clean up the chatter a little bit
Much more clearance and better angles now
Knuckle Under 041.jpg
1422 hits | 72.96 KB | Posted: 7/6/03

Much more clearance and better angles now
Not sure why these pics are so dark
Knuckle Under 042.jpg
1343 hits | 80.53 KB | Posted: 7/6/03

Not sure why these pics are so dark
All done, moved it out of the way so we can do Marks
Knuckle Under 043.jpg
1298 hits | 93.85 KB | Posted: 7/6/03

All done, moved it out of the way so we can do Marks
Purdy
Knuckle Under 045.jpg
1354 hits | 102.42 KB | Posted: 7/6/03

Purdy
Tie rod in stock location
Knuckle Under 009.jpg
1381 hits | 71.86 KB | Posted: 7/6/03

Tie rod in stock location
See the angles on stock tie rod position
Knuckle Under 012.jpg
1326 hits | 75.76 KB | Posted: 7/6/03

See the angles on stock tie rod position
Mark had to put his spindle back together,,,
Knuckle Under 022.jpg
1314 hits | 65.73 KB | Posted: 7/6/03

Mark had to put his spindle back together,,,
Just checking it out
Knuckle Under 030.jpg
1349 hits | 59.73 KB | Posted: 7/6/03

Just checking it out
This is as good as I can do with a hand drill
Knuckle Under 032.jpg
1374 hits | 55.42 KB | Posted: 7/6/03

This is as good as I can do with a hand drill
You can see the bling bling washers we used
Knuckle Under 033.jpg
1403 hits | 68.05 KB | Posted: 7/6/03

You can see the bling bling washers we used
Looking good!!
Knuckle Under 035.jpg
1414 hits | 64.98 KB | Posted: 7/6/03

Looking good!!
Angles much better
Knuckle Under 037.jpg
1426 hits | 81.3 KB | Posted: 7/6/03

Angles much better
The tie rod is almost flat
Knuckle Under 040.jpg
1379 hits | 69.14 KB | Posted: 7/6/03

The tie rod is almost flat
Yay we are done!!
Knuckle Under 047.jpg
1351 hits | 93.8 KB | Posted: 7/6/03

Yay we are done!!
TheJuice looking good
Knuckle Under 046.jpg
1410 hits | 91.58 KB | Posted: 7/6/03

TheJuice looking good
Back in the garage
Knuckle Under 048.jpg
1311 hits | 48.19 KB | Posted: 7/6/03

Back in the garage