SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1987-1991/ “Rough Rider”/ Brass Tee Project supermotors.net/registry/18644/67644

Album section

Brass Tee Project

From 1989 Ford Bronco “Rough Rider”, documented by roughrider.

10 photos
← Back to this vehicle
1989 Ford Bronco - A rusted, T-shaped metal pipe fitting is shown against a brown, textured background. The fitting appears to be made of iron or steel and sh… 1989 Ford Bronco - A brass 1/2 inch pipe tee fitting is shown inside its original packaging. The packaging is white with a yellow header that reads "OPEN AT P… 1989 Ford Bronco - A package containing a brass hose barb adapter is shown against a brown background. The packaging indicates it is a Watts A-493 5/8" Barb x… 1989 Ford Bronco - A package containing a brass barb to MIP adapter, model A-300A, made by Watts. The adapter has a 3/8 inch barb and a 1/2 inch MIP thread. 1989 Ford Bronco - A bronze T-fitting with a "1/2" marking is shown with three brass barbed hose fittings. Two fittings are attached to the sides of the T-fit… 1989 Ford Bronco - A brass T-fitting with three barbed hose connectors is shown against a brown background. The fitting is marked with "1/2" and "CHINA". 1989 Ford Bronco - A package containing a black plastic 5/8" (16mm) 3-way T-shaped heater hose connector, branded with the Goodyear logo and part number 64090. 1989 Ford Bronco - A close-up view shows a copper T-fitting installed in a vehicle's engine bay, connecting three rubber hoses secured with hose clamps. One h… 1989 Ford Bronco - A close-up view shows a copper T-fitting installed in a black hose line, secured with hose clamps. The fitting has "CHINA" and "1/2" stampe… 1989 Ford Bronco - A close-up view shows a bronze T-fitting connecting two black hoses, secured by metal hose clamps. White sealant is visible around the thre…