2005

MSD pro billet distributor P/N 8582 with steel dizzy gear and no vacumm advance Owner trying to get a shot of the vacumm T I made from brass fittings at Napa Owner pic from drivers seat Owner going about 65-70 Owner a little mud streaks on that side Owner CR 19 N Owner RPMs... Owner height to rocker panel w/ 36's and 0" lift Owner Height in front Owner Height to bottom of rocker panel 36's 0" lift Owner Height in front Owner height in the back Owner little tires Owner 8 out of 10 hummer tires would be outside Owner no E brake... 2 hand job to get the hood open Owner The bracket I made to tie it all together. All stuff I had on hand. Owner painted and installed. Its not perfect but its at least 100X better then what I had! Owner is this right?? Owner right now Owner trying to figure out why im only pulling 14in of vacuum at idle Owner shifter knob on an SROD Owner SROD Owner SROD Owner SROD Filler plug and tag placement. Owner Ford symbol... and Bolt that you shouldnt remove. Owner 60's F150 I found in the storage lot, forgot to look under the hood. Owner B&M ratchet shifter and that big, cheap tach say im not as stock as I look! Owner Goodyear racing slicks and ladder bars Owner Close up of shifter Owner CJ8 with no engine tranny in the bed and T case in the cab. Owner bed, BW tranny, 2 tires with rims seat and a metal bucket. Owner the cab. there is a huge drop out 3rd member on the drivers floor. I saw a stamp in the diff inside that had 1969 and nothing else Owner Some sort of Dana transfer case Owner