SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1987–1991/ “Eddie Bauer”/ Remote TFI ICM Upgrade supermotors.net/registry/20487/75165

Album section

Remote TFI ICM Upgrade

From 1990 Ford Bronco “Eddie Bauer” — documented by SeattleFSB.

26 photos
← Back to this vehicle
1990 Ford Bronco - MSD 8451 Ford 351W TFI Distrubutor 1990 Ford Bronco - A black plastic multi-pin electrical connector housing with a red rubber seal ring lies on a white plastic bag, alongside a row of loose si… 1990 Ford Bronco - EMI Shielded Wiring 1990 Ford Bronco - Motorcraft TFI ICM DY1077 / 5U2Z-12A297-DA Note that 5U2J-12A297-DA printed on the ICM is an engineering number, not the part number. 1990 Ford Bronco - Ford Aluminum TFI Heat Sink Assembly 1994-95 T-Bird/Cougar 1990 Ford Bronco - Ford Aluminum TFI Heat Sink Assembly (PN F4SF-12B582-AA) 1990 Ford Bronco - Close-up of an engine bay showing a red distributor cap, braided stainless steel lines, and a blue Goodyear coolant hose, with a hand holdi… 1990 Ford Bronco - Hand holding up a black braid-loomed wiring harness inside an engine bay, with fresh connectors and red leads at its end and split loom run… 1990 Ford Bronco - A hand holds back a black wiring loom to expose a gray two-part electrical connector amid a dense bundle of taped and corrugated wiring har… 1990 Ford Bronco - Close-up of a hand holding a length of black split-loom convoluted wire conduit within an engine bay, with a two-pin black connector wrappe… 1990 Ford Bronco - A hand holds up a black split-loom wiring harness in an engine bay, routed toward electrical connectors near a green metal fender/core supp… 1990 Ford Bronco - Close-up of a finned aluminum Motorcraft TFI ignition control module mounted to a green painted metal fender/inner panel, with a gray multi… 1990 Ford Bronco - Close-up of an engine bay showing a K&N conical red air filter on a cold-air intake, with a finned TFI ignition control module mounted on t… 1990 Ford Bronco - Extreme close-up of a spliced wiring harness with inline components sealed in labeled heat-shrink — two "22K OHMS 0.5W" resistors and an "I… 1990 Ford Bronco - An automotive wiring harness laid open during repair, with taped and loomed wire bundles, inline resistors, a wire stripper, red-handled pl… 1990 Ford Bronco - Engine-bay detail against a blue inner fender showing a finned aluminum module mounted to the fenderwell, dusty wiring harnesses and a gray… 1990 Ford Bronco - A packet of Silicone Heat Sink Paste AK100 is shown, with text detailing the product and contact information. 1990 Ford Bronco - Arctic Silver 5 High-Density thermal paste in a syringe applicator. 1990 Ford Bronco - Permatex dielectric tune-up grease is used to protect electrical connections from moisture and corrosion. 1990 Ford Bronco - Arctic Silver 5 and Ceramique thermal pastes are dispensed from syringes onto a small component. 1990 Ford Bronco - Two paint samples, 'Cool Silver' and 'Arctic Silver 5', are displayed on a white background. 1990 Ford Bronco - A computer processor with thermal paste applied in preparation for installation. 1990 Ford Bronco - This tube of Motorcraft compound is used for brake lubrication and dielectric purposes. 1990 Ford Bronco - A white container with the MSD Ignition logo is shown, with its lid open. 1990 Ford Bronco - AGS Dielectric Silicone Compound packaging, designed to moisture-proof electrical connections for cars, trucks, trailers, and marine applic… 1990 Ford Bronco - Silicone dielectric compound in its original packaging, showing part numbers.