SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Probe/ 1993-1997/ “turbopgt”/ new engine build supermotors.net/registry/20602/75838

Album section

new engine build

From 1995 Ford Probe “turbopgt”, documented by jasonsturbopgt.

12 photos
← Back to this vehicle
1995 Ford Probe - An aluminum engine block (V6) sits disassembled next to a bare metal crankshaft standing upright on a white countertop, with a Lotus-labele… 1995 Ford Probe - Eight pistons arranged in two columns on a steel workbench; the top two are bare aluminum marked 'Pin →1' in blue ink, while the other six… 1995 Ford Probe - Two engine connecting rods laid side by side on a scratched steel workbench: a beefier forged aftermarket rod on top compared against a sli… 1995 Ford Probe - Overhead view of a disassembled aluminum inline-four short block on a stand, deck surface bare with the head removed and three of the four… 1995 Ford Probe - A disassembled aluminum V6 short block standing upright on a garage floor, front cover removed to expose the oil pump housing, crank snout… 1995 Ford Probe - An assembled aluminum V6 short block on an engine stand, viewed down onto one cylinder bank with three bores showing gold-coated piston cro… 1995 Ford Probe - Extreme close-up of a bare aluminum transmission or transfer case housing with the mating flange sealing surface and threaded bolt bosses e… 1995 Ford Probe - Bottom view of an inverted aluminum engine block with the main bearing girdle/ladder bolted in place, looking into the crankcase at the cra… 1995 Ford Probe - Crankcase view of an inverted aluminum engine block with the main bearing girdle installed, exposing two crank throws with connecting rod b… 1995 Ford Probe - Tight close-up into the crankcase of an inverted aluminum engine block, showing crankshaft counterweights and connecting rod big-end caps t… 1995 Ford Probe - Macro shot of a machined two-bolt port flange on an aluminum engine casting, with a round opening and freshly cut sealing surface. A hex-dr… 1995 Ford Probe - Engine rebuild parts laid out on a cardboard flat: three bare forged I-beam connecting rods with machined big-end and pin bores sit alongsi…