1995 Ford Bronco
| Owner: |
exclamation_mark (All of this user's registries on SuperMotors) |
| From: |
Eugene, OR, U.S.A. (Other registries in OR) |
| Year, Make, & Model: |
1995 Ford Bronco (Other Ford Broncos) |
| Avatar: |
 |
| Nickname: |
|
| Mileage: |
215000 |
| Engine: |
5.8l 351W
MSD ignition, cap, rotor
Ford Racing 9 inch wires
Headman long tube headers with 3 inch exhaust and high flow Flowmaster. Removed Cats. |
| Drivetrain: |
Dana 44 TTB front end, Ford 8.8 Rear. 3.55 currently, 4.56 in the works.
|
| Notes: |
6 inch Rough Country lift.
Dual Rough Country Hydro 8000 up front.
Dual Steering stabilizer
35 inch BFG All terrain. |
| Last Updated: |
1/1/2013 |
| Hits: |
10680 |
| Folder |
 |
 |
 |
Hits |
 |
Created |
Updated |
 My 95' XLT FSB | 70 | 0 | 0 | 18,845 | 0 | 3/24/10 | 6/8/12 | | Air Intake | 8 | 0 | 0 | 2,079 | 0 | 3/30/12 | 3/30/12 | | Stuck in the mud | 6 | 0 | 0 | 808 | 0 | 6/8/12 | 6/8/12 | | Steering | 8 | 0 | 0 | 1,149 | 0 | 6/8/12 | 6/8/12 | | bed liner | 74 | 0 | 0 | 8,679 | 0 | 6/8/12 | 6/8/12 | | 6 Inch Lift | 77 | 0 | 0 | 9,264 | 0 | 6/8/12 | 6/8/12 | | Grille | 16 | 0 | 0 | 2,130 | 0 | 6/8/12 | 6/8/12 | | bumper | 5 | 0 | 0 | 724 | 0 | 6/8/12 | 6/8/12 | | vet plates | 3 | 0 | 0 | 438 | 0 | 6/8/12 | 6/8/12 | | Exhaust | 7 | 0 | 0 | 1,007 | 0 | 6/9/12 | 6/9/12 | | Oval | 7 | 0 | 0 | 849 | 0 | 6/9/12 | 6/9/12 | | Body lift | 16 | 0 | 0 | 1,992 | 0 | 6/9/12 | 6/9/12 | | 6/9/12 | 37 | 0 | 0 | 4,866 | 0 | 6/9/12 | 6/9/12 | | Bronco Flop | 24 | 0 | 0 | 2,682 | 0 | 12/30/12 | 12/30/12 | | Mudding on the Farm | 29 | 0 | 0 | 4,829 | 0 | 1/1/13 | 1/1/13 | | GIF | 1 | 0 | 0 | 140 | 0 | 2/22/12 | 2/22/12 |
.jpg) IMAG0968 (1).jpg
909 hits | 76.75 KB | Posted: 2/13/12
 IMAG0967.jpg
765 hits | 62.96 KB | Posted: 2/13/12
 7.jpg
613 hits | 93.83 KB | Posted: 3/24/10
Right after i bought it and installed the light bar. This was the first camping trip i took it on.
 100_6415.JPG
599 hits | 52.61 KB | Posted: 3/24/10
This was just before the lift was installed. I had just purchased 33 inch tires.
 100_2620.JPG
558 hits | 55.64 KB | Posted: 3/24/10
I cut the carpet out of the back and used a roll on bed liner. I put the transitions for the carpet under teh back seat so the carpet still fell over the back seat hump viewing from the doors.
 100_6462.JPG
544 hits | 63.7 KB | Posted: 3/24/10
After the lift was installed. In these pictures she still has the 33 inch tires. They were replaced by 35 inch tires.
 Bronco Front NL.jpg
533 hits | 87.4 KB | Posted: 5/4/10
 100_1724.JPG
512 hits | 103.39 KB | Posted: 3/24/10
I just installed the brush gaurd. It later was used to move a tree, and saved my signal lights and headlight from a fence. It did not survive those and was later removed.
 100_2570.JPG
512 hits | 71.24 KB | Posted: 3/24/10
I had a pretty bad moisture problem inside the Bronco so i removed the paneling and carpet to find that the carpet was soaked and molding really bad.
Maintenance & Modification Logs
This user hasn't added any log entries, yet.
|
|
