IMG_0055[1].JPG
2604 hits | 68.59 KB | Posted: 2/25/12
Start by removing the clear plastic and black surround.

IMG_0045[1].JPG
1767 hits | 53.3 KB | Posted: 2/25/12
I started by dissassembling the cluster. I then Noted(with pictures) the position of the needles and...

IMG_0047[1].JPG
1682 hits | 56.07 KB | Posted: 2/25/12
I started by dissassembling the cluster. I then Noted(with pictures) the position of the needles and...

IMG_0050[1].JPG
1967 hits | 57.9 KB | Posted: 2/25/12
The PSOM was a little more work. I attatched a 9V battery to the top two pins on the back of the PSO...

IMG_0052[1].JPG
2029 hits | 90.21 KB | Posted: 2/25/12
Here is a picture of how the 9V is connected to the PSOM.

IMG_0057[1].JPG
1795 hits | 49.91 KB | Posted: 2/25/12
Next comes peeling off the Gauge face. It will be a bit resistant so take your time.

IMG_0058[1].JPG
1867 hits | 57.52 KB | Posted: 2/25/12
Next comes peeling off the Gauge face. It will be a bit resistant so take your time. The PSOM has a ...

IMG_0059[1].JPG
1695 hits | 54.97 KB | Posted: 2/25/12
**Update**: When I did my cluster I used Q-tips and rubbing alcohol. Worked, had a cleaner result. I...

IMG_0060[1].JPG
1646 hits | 54.23 KB | Posted: 2/25/12
This may not be neccessary, but I had problems with little specs showing through when light shined t...

IMG_0054[1].JPG
1792 hits | 34.74 KB | Posted: 2/25/12
When your done, put it all back together. This is it lit up. Not all of the Bulbs are lit(hooked up ...

IMG_0065[1].JPG
1982 hits | 59.39 KB | Posted: 2/26/12
Finished my own cluster today. Ordered some LED's should be here this week. Now, on to the heater co...

IMG_0068[1].JPG
1959 hits | 37.76 KB | Posted: 3/1/12
LED lights installed in cluster. I think it looks great. Heater controls cant really be done. I trie...

IMG_0071[1].JPG
1713 hits | 53.06 KB | Posted: 3/2/12
These are the LED's that i used. Ordered from amazon. Plug and play.

IMG_0072[1].JPG
1470 hits | 51.93 KB | Posted: 3/2/12
These are the LED's that i used. Ordered from amazon. Plug and play.

IMG_0070[1].JPG
2072 hits | 56.01 KB | Posted: 3/2/12
Heres everything put back together.

IMG_0128[1].JPG
1359 hits | 60 KB | Posted: 6/25/12
As of 6/12/13, I still have this cluster. If you would like to purchase me I can be reached either t...

IMG_0353[2].JPG
1298 hits | 65.94 KB | Posted: 8/20/12
Reference image of the oil gauge resistor.

IMG_0354[1].JPG
1253 hits | 58.08 KB | Posted: 8/20/12
Rear of the oil pressure gauge.

IMG_0355[1].JPG
1250 hits | 73.2 KB | Posted: 8/20/12
Circuit film of a 92-93 Gas, non-tach cluster.

IMG_0878.JPG
1217 hits | 36.4 KB | Posted: 5/17/13
Cluster after a year. It is dimmer in person. The bulbs are wearing out...

IMG_0879.JPG
1063 hits | 24.69 KB | Posted: 5/17/13
Finally got the heater controls matched. Need to swap out that halogen bulb in the vacuum gauge to a...

IMG_0880.JPG
1115 hits | 28.8 KB | Posted: 5/17/13
Dash light as of 5/17/13.