SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “B3”/ modified front swaybar supermotors.net/registry/25989/86326

Album section

modified front swaybar

From 1996 Ford Bronco “B3”, documented by Kingfish999.

11 photos
← Back to this vehicle
1996 Ford Bronco - due to my soft 5.5inch Deaver coils and my high speed driving i really need swaybars. but with the lift and my tierod flip, i needed to mod… 1996 Ford Bronco - i went ahead and dropped the swaybar. 1996 Ford Bronco - my plan was to use rear swaybar links, cut and weld them together so there is an eyelet on each side. kinda expenive to buy new but i bough… 1996 Ford Bronco - we need to move the swaybar forward some so the bar wont be inside the coils. but we do not want the mounts too far forward or it will loos… 1996 Ford Bronco - this is how it turned out. might be a good idea to add a washer or 2 the same thickness as that mounting tab on the front bolt to keep it f… 1996 Ford Bronco - the tierod is blocking the view but this is where the sway bar will be and it wont hit the coil. this hieght allows the most travel up and… 1996 Ford Bronco - i cut 2 links right past the end of the bend. the bend will make it easier to connect due to the slight offset 1996 Ford Bronco - this is the links welded up and with some paint thrown on them. the bends will help offset. i should have actually made them offset a bit m… 1996 Ford Bronco - i replaced the cheap rubber bushings with Moog theroplastic bushings which should last longher 1996 Ford Bronco - this is how it looks installed. since my truck is a dual shock setup, i used the lower shock mount used for the auxiliary shock.the longer… 1996 Ford Bronco - front view of it installed. i should have added alittle bit more offset but it worked out good still. you can see that if you use the stock…