Steve83 > 1983 Ford Bronco > open folder TSB 94-15-13 Dash Tab

The main structure of '92-96 (& '97 >8500GVWR) dashes are the black plastic A/C ducts, with a colore...
01DashBroken.JPG
3259 hits | 82.69 KB | Posted: 5/18/11
The main structure of '92-96 (& '97 >8500GVWR) dashes are the black plastic A/C ducts, with a colore...
TSB 94-15-13 Dash Right Attachment TabIF THE IMAGE IS TOO SMALL, click it.Publication Date: JULY 2...
TSB94-15-13Pics.JPG
10779 hits | 64.43 KB | Posted: 4/9/07
TSB 94-15-13 Dash Right Attachment Tab
IF THE IMAGE IS TOO SMALL, click it.
Publication Date: JULY 2...
There are very few of these kits left, but I managed to find one for less than the full list price. ...
02Kit.JPG
3010 hits | 37.49 KB | Posted: 5/18/11
There are very few of these kits left, but I managed to find one for less than the full list price. ...
This is how the TSB says to prepare the dash, but it didn't give me enough working room. I didn't d...
03Prep.JPG
2567 hits | 90.19 KB | Posted: 5/18/11
This is how the TSB says to prepare the dash, but it didn't give me enough working room. I didn't d...
The TSB says to sand the rough surface flat, but I didn't feel like wasting that much elbow grease, ...
04Sand.JPG
2215 hits | 69.9 KB | Posted: 5/18/11
The TSB says to sand the rough surface flat, but I didn't feel like wasting that much elbow grease, ...
Pretty flat, and some of the slag stayed attached.Continue to the NEXT pic...
05Brushed.JPG
2159 hits | 74.52 KB | Posted: 5/18/11
Pretty flat, and some of the slag stayed attached.

Continue to the NEXT pic...
A perfect fit.Continue to the NEXT pic...
06Placed.JPG
2211 hits | 67.7 KB | Posted: 5/18/11
A perfect fit.

Continue to the NEXT pic...
Even using a right-angle drill and a short (LeftHand) bit, I couldn't get in line. Also, the TSB sa...
07Tight.JPG
2183 hits | 61.35 KB | Posted: 5/18/11
Even using a right-angle drill and a short (LeftHand) bit, I couldn't get in line. Also, the TSB sa...
After loosening the 4th bolt on the column support, wedging the dash a little farther out, and swapp...
08More.JPG
2208 hits | 80.46 KB | Posted: 5/18/11
After loosening the 4th bolt on the column support, wedging the dash a little farther out, and swapp...
These are low-force rivets, so it didn't take much effort to set them.The wide head on the 3/8&quo...
09Rivet.JPG
2127 hits | 71.22 KB | Posted: 5/18/11
These are low-force rivets, so it didn't take much effort to set them.

The wide head on the 3/8&quo...
That's a winner!Continue to the NEXT pic...
10Installed.JPG
2202 hits | 70.92 KB | Posted: 5/18/11
That's a winner!

Continue to the NEXT pic...
Done, other than reinstalling the trim pieces.I now make & sell these kits. See:[url=https://www...
11Done.JPG
2240 hits | 81.69 KB | Posted: 5/18/11
Done, other than reinstalling the trim pieces.

I now make & sell these kits. See:

[url=https://www...
These tabs are very close to the original late-'95-97 parts, and Aluminum rivets are included with t...
DashRtabKit.jpg
349 hits | 57.54 KB | Posted: 11/15/21
These tabs are very close to the original late-'95-97 parts, and Aluminum rivets are included with t...
This '95 F150 XLT dash was made before the revision, so I installed a steel tab that I made on it. I...
95BuDashTab.jpg
290 hits | 61.21 KB | Posted: 11/15/21
This '95 F150 XLT dash was made before the revision, so I installed a steel tab that I made on it. I...