TSB 94-15-13 Dash Tab

The main structure of '92-96 (& '97 >8500GVWR) dashes are the black plastic A/C ducts, with a colored skin wrapped over them, and some comp… Owner TSB 94-15-13 Dash Right Attachment Tab IF THE IMAGE IS TOO SMALL, click it. Publication Date: JULY 27, 1994 LIGHT TRUCK: 1992-94 BRONCO, F… Owner There are very few of these kits left, but I managed to find one for less than the full list price. If you can't read the invoice, click th… Owner This is how the TSB says to prepare the dash, but it didn't give me enough working room. I didn't disconnect the battery - I was listening… Owner The TSB says to sand the rough surface flat, but I didn't feel like wasting that much elbow grease, or cleaning up all that black dust. Thi… Owner Pretty flat, and some of the slag stayed attached. Continue to the NEXT pic... Owner A perfect fit. Continue to the NEXT pic... Owner Even using a right-angle drill and a short (LeftHand) bit, I couldn't get in line. Also, the TSB says to drill 1/4", but the holes in… Owner After loosening the 4th bolt on the column support, wedging the dash a little farther out, and swapping to a 3/16" bit, access was muc… Owner These are low-force rivets, so it didn't take much effort to set them. The wide head on the 3/8" bolt I used prevented me from setting… Owner That's a winner! Continue to the NEXT pic... Owner Done, other than reinstalling the trim pieces. I now make & sell these kits. See: [url=https://www.supermotors.net/registry/media/1167727]… Owner These tabs are very close to the original late-'95-97 parts, and Aluminum rivets are included with them. Email me through my profile here o… Owner This '95 F150 XLT dash was made before the revision, so I installed a steel tab that I made on it. I eyeballed the position of the hole in… Owner