SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992–1996/ “'96 Bronco”/ Fab'd Step Board Support supermotors.net/registry/27779/86034

Album section

Fab'd Step Board Support

From 1996 Ford Bronco “'96 Bronco” — documented by Fitzy.

7 photos
← Back to this vehicle
1996 Ford Bronco - NOTE: This project became useless after I removed the running boards completely after painting the truck.NOTE: This project became useless after I removed the running boards completely after painting the truck. Owner 1996 Ford Bronco - I grabbed a piece of pipe from home depot and bent it to match one side of the original rusted out tubing. I couldn't bend it to match the…I grabbed a piece of pipe from home depot and bent it to match one side of the original rusted out tubing. I couldn't bend it to match the… Owner 1996 Ford Bronco - I found a couple L-angle pieces to use as a bit of extra support. They would be connected to each of the far holes. I did end up having to…I found a couple L-angle pieces to use as a bit of extra support. They would be connected to each of the far holes. I did end up having to… Owner 1996 Ford Bronco - Then I drilled holes in the bent pipe to hook to the step bar.Then I drilled holes in the bent pipe to hook to the step bar. Owner 1996 Ford Bronco - Hooked the L-angles and new pipe to the step bar.Hooked the L-angles and new pipe to the step bar. Owner 1996 Ford Bronco - Forgot to take a picture during the work but I cut off one of the original U support pipes and bolted it into my pipe for a little extra su…Forgot to take a picture during the work but I cut off one of the original U support pipes and bolted it into my pipe for a little extra su… Owner 1996 Ford Bronco - Here it is installed with stainless bolts. Maybe it'll last.Here it is installed with stainless bolts. Maybe it'll last. Owner