Hi-Lift Extreme XT-485.jpg
78 hits | 16.89 KB | Posted: 2/4/19
Hi-Lift Extreme XT-485 reporting for duty.

DSCF0746 - hi-lift position.jpg
77 hits | 33.96 KB | Posted: 2/6/19
Decided on a mounting location for the Hi-Lift jack, just need to fabricate a bracket to hold it a s...

DSCF0750 - hi-lift mount.jpg
67 hits | 20.73 KB | Posted: 2/7/19
Hi-Lift mounted.

DSCF0755 - hi-lift mount.jpg
74 hits | 22.59 KB | Posted: 2/7/19
Hi-Lift mounted.

DSCF0759 - hi-lift mount.jpg
70 hits | 26.78 KB | Posted: 2/7/19
Hi-Lift mounted.

DSCF0760 - hi-lift mount.jpg
82 hits | 55.74 KB | Posted: 2/7/19
Old trim panel chopped to finish up the Hi-Lift mount.

DSCF0761 - hi-lift mount.jpg
84 hits | 73.34 KB | Posted: 2/7/19
Old trim panel chopped to finish up the Hi-Lift mount.

DSCF0766 - hi-lift mount.jpg
72 hits | 52.33 KB | Posted: 2/7/19
Outside view of the Hi-Lift mount.

DSCF0764 - hi-lift mount.jpg
64 hits | 44.56 KB | Posted: 2/7/19
Oops...all my test fits were with the seat forward; didn't think to check interference there, so wil...

DSCF0768 - hi-lift mount.jpg
79 hits | 42.8 KB | Posted: 2/9/19
Secured the top much better with some heavy duty-ish straps.

DSCF0772 - hi-lift mount.jpg
65 hits | 48.64 KB | Posted: 2/9/19

DSCF0796 - v2 Hi-Lift bracket.jpg
123 hits | 34.78 KB | Posted: 2/25/19
v2 bracket.

DSCF0798 - v2 Hi-Lift bracket.jpg
141 hits | 61.47 KB | Posted: 2/25/19
v2 bracket.

DSCF0800 - v2 Hi-Lift mounted.jpg
104 hits | 54.27 KB | Posted: 2/25/19
v2 bracket mounted.

DSCF0801 - v2 Hi-Lift mounted.jpg
123 hits | 41.11 KB | Posted: 2/25/19
v2 bracket mounted.

DSCF0802 - v2 Hi-Lift mounted.jpg
104 hits | 30.51 KB | Posted: 2/25/19
v2 bracket mounted.

DSCF0803 - v2 Hi-Lift mounted.jpg
113 hits | 42.75 KB | Posted: 2/25/19
v2 bracket mounted.

DSCF3696 - hi-lift mount more vertical.jpg
122 hits | 14.62 KB | Posted: 12/19/21
Tweaked the Hi-Lift mount to allow it to sit closer to vertical. The climbing pins were interfering...

DSCF3697 - hi-lift mount more vertical.jpg
70 hits | 30.14 KB | Posted: 12/19/21
Rear view of the modified mount. Bolting it together is trickier now, as is getting the top velcro ...