SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “Snot”/ Stock Center Console supermotors.net/registry/28330/87211

Album section

Stock Center Console

From 1996 Ford Bronco “Snot”, documented by flomaster.

12 photos
← Back to this vehicle
1996 Ford Bronco - Here's the stock center console I scored from the Junk yard. It was missing one cup, and the thing was ABSOLUTELY FILTHY. I cleaned it up i… 1996 Ford Bronco - In the beginning there was a void. This is the stock XL configuration with rubber mat as opposed to carpeting. The problem is is that there… 1996 Ford Bronco - Looking up from underneath the truck, on the driver's side we can see that Ford has already punched a hole in the body in order to mount th… 1996 Ford Bronco - Looking up from underneath the truck on the passenger side. You can see just past the exhaust, and just to the passenger side of the transm… 1996 Ford Bronco - Here are the tools I used to mark the position of the screw holes on the inside of the truck. You'll see a blow torch and a piece of weldin… 1996 Ford Bronco - Here you can see the holes created by the hot welding rod. The initial hole was quite small--only the diameter of the welding rod. From ins… 1996 Ford Bronco - After creating and expanding the first two holes, I mounted the center console using the first two screws only. Once screwed down, I used t… 1996 Ford Bronco - After marking the location of the third mounting hole, I removed the center console again so that I could expand the hole slightly, and to… 1996 Ford Bronco - Mounted. The screws originally came with some kind of sticky glue on the threads. I suggest using the same type of glue when you put it bac… 1996 Ford Bronco - Installed. 1996 Ford Bronco - Installed. The seats are from a 1999 explorer--direct bolt in. 1996 Ford Bronco - Installed. I think the entire process took me about 20 minutes.