FB_IMG_1528671378876.jpg 524 hits | 54.88 KB | Posted: 8/11/18 Fromt photo of the truck the day I bought it.
FB_IMG_1528671363630.jpg 87 hits | 56.71 KB | Posted: 8/11/18 Rear photo of the truck the day I bought it.
KIMG0433.JPG 78 hits | 66.1 KB | Posted: 8/11/18 A photo of all the dead wiring I pulled out of the truck. This is only half of what I actually ended...
KIMG0138.JPG 82 hits | 65.02 KB | Posted: 8/25/18 The bronco had no breaks so I had to tow it to my auto mechanic shop. The wheels scraped the trailer...
KIMG0434.JPG 70 hits | 46.67 KB | Posted: 8/11/18 The rear window was broken and left open for several months. Because of the vinal interior the mat u...
KIMG0456.JPG 68 hits | 55.48 KB | Posted: 8/11/18 I stripped the whole bed in preparation for painting.
KIMG0463.JPG 58 hits | 60.53 KB | Posted: 8/11/18 I stripped the whole bed in preparation for painting.
KIMG0471.JPG 81 hits | 51.91 KB | Posted: 8/11/18 How it looked when I was all done.
KIMG0705.JPG 156 hits | 63.26 KB | Posted: 8/11/18 Needed to install a 2nd battery before phone.
KIMG0711.JPG 114 hits | 65.81 KB | Posted: 8/11/18 I want to install an inverter, strobe package, lots of work lights, and multiple radios but I didn't...
KIMG0669.JPG 136 hits | 50.33 KB | Posted: 8/11/18 Here's how it looks fully installed.
I also took a the wires going to the cigarette lighter and ins...
KIMG0701.JPG 88 hits | 49.38 KB | Posted: 8/11/18 Had to do some electrical work above the Hy rail wheels. So I had to quickly set up some "rails...
KVID0467.mp4 152 hits | 12.22 MB | Posted: 8/11/18 While I was gutting all the old aftermarket wiring so I could start new I found 2 strobe control box...
KVID0703.mp4 176 hits | 13.85 MB | Posted: 8/11/18 The reverse lights also flash as well.
KIMG0725.JPG 124 hits | 51.74 KB | Posted: 8/16/18 I built a new control panel for controlling the lights on the truck. The old one only had 2 switche...
KIMG0665.JPG 115 hits | 45.48 KB | Posted: 8/26/18 With a few cuts of a grinder I was able to use the old Ash tray drawer as a mounting bracket for my ...
KIMG0462.JPG 120 hits | 59.33 KB | Posted: 8/25/18 An vacuum hose repair from the railroad's "auto mechanic" piece of fuel line slid over the...
KIMG0797.JPG 74 hits | 59.17 KB | Posted: 8/31/18 The skid plate for the fuel tank before
KIMG0798.JPG 73 hits | 52.52 KB | Posted: 8/31/18 The skid plate for the fuel tank before.
KIMG0801.JPG 82 hits | 59.36 KB | Posted: 8/31/18 It started raining while I was painting it and every bay at my auto mechanic's shop was full so I co...
KIMG0804.JPG 61 hits | 49.47 KB | Posted: 8/31/18 The skid plate finished. I used bed liner paint to hopefully protect it from scraches and rusting.
KIMG0805.JPG 65 hits | 51.02 KB | Posted: 8/31/18 The skid plate finished. I used bed liner paint to hopefully protect it from scraches and rusting.
KVID0809.mp4 155 hits | 13.46 MB | Posted: 8/31/18 Got all the strobes wired up to a switch. Here's a video of them all on. Still need to program them.
KIMG0811.JPG 95 hits | 38.86 KB | Posted: 8/31/18 My mechanic decided to drop the fuel tank to change the fuel pump.
KIMG0813.JPG 71 hits | 54.8 KB | Posted: 9/1/18 While the fuel tank was out I decided to sandblast it so I could paint it while it was out.
KIMG0821.JPG 89 hits | 56.33 KB | Posted: 9/1/18 While sandblasting I found a four of pin he's on the top half of the tank. Decided I would just patc...
KIMG0823.JPG 71 hits | 53.79 KB | Posted: 9/1/18 Shortly after starting on the bottom I found more holes in the tank. I decided that the to the fact ...
KIMG0825.JPG 69 hits | 43.72 KB | Posted: 9/1/18 The Hy rail gear act like a built in jack stands. Still put one under the axles to be safe.
KIMG0835.JPG 81 hits | 55.66 KB | Posted: 9/3/18 Bought a new tank. Sandblasted cleaned it to scuff the surface and get any I'll off the surface.
KIMG0836.JPG 67 hits | 62.08 KB | Posted: 9/3/18 Primer
KIMG0837.JPG 108 hits | 61.44 KB | Posted: 9/3/18 Final coat of bed liner.
KIMG0838.JPG 141 hits | 51.18 KB | Posted: 9/3/18 Undercarriage where the tank goes got a coat of bed liner as well.
KIMG0840.JPG 114 hits | 63.56 KB | Posted: 9/3/18 Installed hood lights and a speaker under the hood.
KIMG2553.JPG 64 hits | 39.33 KB | Posted: 1/13/20 Installed a inter-cooler in the Bronco from an old ambulance i bought and stripped of all useful par...
KIMG2562.JPG 54 hits | 42.61 KB | Posted: 1/13/20 I fixed the original spot light but due to how warn out it was it had multiple dead spots as you tur...
KIMG2561.JPG 84 hits | 41.84 KB | Posted: 1/13/20 Photo of her home for the first time ever. When I first bought this truck it went straight to my mec...
KIMG2556.JPG 84 hits | 42.08 KB | Posted: 1/13/20 Installed ground lights that light up the ground when you open the doors. One of my friends only dri...
KIMG0620.JPG 104 hits | 83.79 KB | Posted: 7/26/20 Took my truck "offloading" for the first time since I bought it. Was only like 1/4 mile to...
Pictures
