The t/g handle was destroyed, so it was replaced with a good used one.
20210126_135204.jpg
97 hits | 108.63 KB | Posted: 1/30/21

The t/g handle was destroyed, so it was replaced with a good used one.
Even after straightening & lubricating the remote control, it still wouldn't move smoothly, which wa...
20210126_134749.jpg
207 hits | 42.25 KB | Posted: 1/30/21

Even after straightening & lubricating the remote control, it still wouldn't move smoothly, which wa...
The internal glass runs (E1TZ98422A20A) are degraded, so they were flipped. The broken [url=https://...
20210126_145000.jpg
251 hits | 97.83 KB | Posted: 1/30/21

The internal glass runs (E1TZ98422A20A) are degraded, so they were flipped. The broken [url=https://...
The missing link wire was replaced in the passenger seat slide.
20210126_164235.jpg
159 hits | 117.16 KB | Posted: 1/30/21

The missing link wire was replaced in the passenger seat slide.
The driver's armrest was tightened with a strip of low-friction tape. The passenger armrest was bolt...
20210128_154419.jpg
138 hits | 42.44 KB | Posted: 1/30/21

The driver's armrest was tightened with a strip of low-friction tape. The passenger armrest was bolt...
The rear seat strike sleeve was replaced to eliminate its rattling.[url=https://www.supermotors.ne...
20210128_154326.jpg
137 hits | 124.16 KB | Posted: 1/30/21

The rear seat strike sleeve was replaced to eliminate its rattling.

[url=https://www.supermotors.ne...
The A/C leak seems to have been from the high-side fitting. The (abandoned) alarm speaker was remove...
20210126_181826.jpg
140 hits | 113.57 KB | Posted: 1/30/21

The A/C leak seems to have been from the high-side fitting. The (abandoned) alarm speaker was remove...
The pitman arm nut was found to be loose, so it was tightened to a few hundred ft-lbs.
20210127_135713.jpg
155 hits | 109.5 KB | Posted: 1/30/21

The pitman arm nut was found to be loose, so it was tightened to a few hundred ft-lbs.
The fuel float had filled with gas (it was empty when the pump was replaced several months ago), so ...
20210128_170942.jpg
273 hits | 37.14 KB | Posted: 1/30/21

The fuel float had filled with gas (it was empty when the pump was replaced several months ago), so ...
Both engine mounts were broken (as usual), so fabricated polyurethane mounts were swapped in. That a...
20210129_112029.jpg
172 hits | 34.76 KB | Posted: 1/30/21

Both engine mounts were broken (as usual), so fabricated polyurethane mounts were swapped in. That a...
Both rubber elbows in the VMV line were degraded, and this one is collapsing under engine vacuum. Bo...
20210129_174724.jpg
176 hits | 61.02 KB | Posted: 1/30/21

Both rubber elbows in the VMV line were degraded, and this one is collapsing under engine vacuum. Bo...