Jess Olson > 1986 Ford Bronco > open folder Shock install

This is the drivers front from the top when completed.
shock1.JPG
764 hits | 108.99 KB | Posted: 7/21/03
This is the drivers front from the top when completed.
Here is the passanger front with the hole cut to pass the shock through.
shock2.JPG
807 hits | 99.02 KB | Posted: 7/21/03
Here is the passanger front with the hole cut to pass the shock through.
Upper mount needed to be removed and turned down to accept the Bilstien heim joint on top. You can ...
shock5.JPG
858 hits | 95.19 KB | Posted: 7/21/03
Upper mount needed to be removed and turned down to accept the Bilstien heim joint on top. You can ...
Here is what my lower brackets look like. Not real pretty but they should hold.
shock6.JPG
751 hits | 77.48 KB | Posted: 7/21/03
Here is what my lower brackets look like. Not real pretty but they should hold.
Another shot of cutout on passenger side to pass the shock through.
shock7.JPG
770 hits | 76.6 KB | Posted: 7/21/03
Another shot of cutout on passenger side to pass the shock through.
This is the finished front on the drivers side.
shock3a.JPG
760 hits | 75.65 KB | Posted: 7/21/03
This is the finished front on the drivers side.
Here is the finished front on the passanger side.
shock8a.jpg
1243 hits | 96.49 KB | Posted: 7/21/03
Here is the finished front on the passanger side.