SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1978-1979/ “Drag Bronco”/ Rear Housing Upgrade supermotors.net/registry/3878/15223

Album section

Rear Housing Upgrade

From 1979 Ford Bronco “Drag Bronco”, documented by Pat P.

29 photos
← Back to this vehicle
1979 Ford Bronco - Close-up of one end of a freshly black-painted rear axle housing on a concrete floor, showing the bare machined axle flange, welded-on spri… 1979 Ford Bronco - A freshly painted gloss black rear axle housing lying on a cracked concrete shop floor, with welded-on leaf-spring perches, shock mounts an… 1979 Ford Bronco - A black rear axle assembly is shown, likely a replacement or upgrade part. 1979 Ford Bronco - Overhead view of a gloss black rear axle housing laid out on a garage floor, showing welded tubular truss bracing, tall multi-hole shock/li… 1979 Ford Bronco - Freshly painted gloss-black rear axle housing lying on a cracked concrete slab, showing the pressed-steel differential center section with… 1979 Ford Bronco - A black rear axle assembly is laid out on a concrete surface, with brake drums and jack stands visible. 1979 Ford Bronco - Close-up of freshly welded and black-painted suspension brackets on an axle housing, with a three-hole link mount plate, shock tab and bead… 1979 Ford Bronco - Close-up of the center section of a gloss-black-painted rear axle housing lying on concrete, showing the pumpkin with its ring of cover stu… 1979 Ford Bronco - A freshly painted black rear axle housing with fabricated four-link brackets and welded truss tubes laid out on a garage floor, with two ba… 1979 Ford Bronco - Low ground-level shot under a truck showing a rear leaf-spring rear shackle assembly: a fresh black-painted multi-leaf spring pack hangs fr… 1979 Ford Bronco - Two rod end bearings are shown on a cluttered workbench, likely for an automotive upgrade. 1979 Ford Bronco - Close-up of a rod end bearing, a component used in automotive suspension and steering systems. 1979 Ford Bronco - Close-up of a gloss-black fabricated suspension link and axle tube joint, with visible MIG bead welds and a two-hole mounting tab bracket,… 1979 Ford Bronco - Old wedge 1979 Ford Bronco - Old wedge 1979 Ford Bronco - Comparison of two axle shafts, one black and one silver, with visible splines and a watermark at the bottom. 1979 Ford Bronco - Close-up view of two metal components, one stamped numbers '28333' and a letter 'F'. 1979 Ford Bronco - A differential housing part is shown on a workbench, with visible text on its side. 1979 Ford Bronco - A differential part with a splined interior and a flange 10 bolt holes is shown on a workbench. 1979 Ford Bronco - Driveshaft assembly on a rug, possibly for a vehicle upgrade. 1979 Ford Bronco - Close-up of a vehicle axle shaft with bearings and a mounting flange. 1979 Ford Bronco - Close-up of an axle shaft assembly with a visible hub flange and bearing, a yellow and purple emblem. 1979 Ford Bronco - Two differential components, a ring gear and a pinion gear with bearings, are displayed on a metal surface. 1979 Ford Bronco - Close-up view of a splined hub and its roller bearing, revealing the internal splines. 1979 Ford Bronco - Tapered roller bearing shown in detail, possibly for a rear axle upgrade. 1979 Ford Bronco - Close-up of two differential bearing and race sets with a covered vehicle and trailer in the background. 1979 Ford Bronco - Close-up view of differential gears and axle shafts, with visible nuts and splines. 1979 Ford Bronco - Close-up of two splined shafts and bolts, positioned before a metal ring. These look like automotive components. 1979 Ford Bronco - Close-up of two axle shafts and a differential housing, likely for a vehicle upgrade.