'79 Buildup

We decided to stick the engine in immediatley after we pulled it from the '85 Owner Two vehicles are in a state of disassembly, with one body covered by a blue tarp, revealing exposed engines and chassis components. AI caption Y pipe hits the frame pretty hard, we were so hoping it would go in easy Owner Pulled off the Y and it dropped right in Owner Ford V8 engine components including starter motor and exhaust manifold are visible in this close-up shot. AI caption Mechanic using an engine hoist to remove the engine from a vehicle chassis during a repair or restoration. AI caption Everything lines up pretty good on this side Owner The engine bay of a vehicle is partially covered by a blue tarp, with red springs and tools visible. AI caption Put the 4" Skyjacker springs in Owner Putting in the 9" with 4.10 gears and ARB from the '85 Owner Sitting on all 4 again Owner Set the 37's on to see how they fit Owner A black 1979 Ford Bronco is parked in a driveway, its bed covered by a blue tarp. AI caption This black 1979 Ford Bronco is partially covered by a blue tarp, revealing its lifted suspension and large off-road tires. AI caption Rear view of a 1979 Ford Bronco pickup truck with its bed covered by a blue tarp. AI caption Small notch for the Y pipe Owner Close, but it fits Owner Close-up view of the rusty undercarriage and suspension system of a vehicle. AI caption Need to get the Y pipe fixed right before the test pipe to move this up Owner Gas tank getting closer to fitting Owner The rear axle and fuel tank of a 1979 Ford Bronco are visible, showing modifications for off-road use. AI caption $94 chunk of steel Owner Test fitting the skid plate Owner Set a fender on to see how it looks Owner Loosely bolted in Owner Todd made me weld Owner Looks okay for no gas i guess Owner Todd Cleanin it up Owner Looks better clean Owner Coat of paint Owner Used these captured nuts so the skid was easy to install Owner The guys stuck under the skidplate Owner Skid bolted in Owner The rear of a black truck is disassembled and elevated on jack stands, with a silver truck parked nearby. AI caption The underside of a 1979 Ford Bronco shows its frame and suspension components, with another vehicle partially visible. AI caption Put new ends on the brake lines and got them hooked up with the '78 prop valve Owner Bumper installed Owner A black Ford Bronco is parked next to a silver Ford truck, with its tailgate open and interior visible. AI caption Put the front clip on today Owner Front view of a black 1979 Ford Bronco, missing its grille, with a red interior visible. AI caption Close-up of a 1979 Ford Bronco's front end being worked on, with a second vehicle visible to the side. AI caption Front view of a black Ford truck with a large tire and lifted suspension, showing the fender and turn signal. AI caption Close-up view of the front fender and suspension system of a 1979 Ford Bronco, highlighting the red coil springs and off-road tire. AI caption RIP! This project finally killed the $10 HF grinder Owner Bucket seats mounted and started figuring out where the shifter is gonna go Owner Driveline is hitting the tranny crossmember very hard. Owner Mechanic working on the undercarriage of a large truck, focusing on suspension parts. AI caption Crossmember as it sits Owner Close-up view of the undercarriage of a 1979 Ford Bronco, showing the frame and suspension. AI caption Boxes came from Duff Owner Various blue-painted suspension parts and hardware are arranged on a workbench, with a large tire visible beneath. AI caption Various blue-painted suspension parts and a bag of hardware are arranged on a piece of plywood resting on tires. AI caption Up on stands Owner Black Ford Bronco undergoing maintenance on jack stands, with a white truck visible in the background. AI caption This truck is undergoing repairs with its front end disassembled and supported on jack stands. AI caption Mechanics work on a black Ford Bronco lifted on jack stands in a driveway, with another truck visible in the background. AI caption Mechanic works on the front suspension of a 1979 Ford Bronco, which is raised on jack stands. AI caption Front end of a 1979 Ford Bronco is raised on jack stands for repair or restoration. AI caption This Ford truck is raised on jack stands, showing its undercarriage and missing front grille. AI caption Grinding metal tubing on a workbench with sparks flying. AI caption A cluttered garage scene with a welding machine, tools, and various shop equipment. AI caption Metal fabrication parts are laid out on a workbench, suggesting ongoing vehicle repair or modification. AI caption Custom metal fabrication is being performed on the underbody of a vehicle, with a jack stand providing support and another vehicle in the b… AI caption Close-up of vehicle undercarriage, focusing on mechanical components and frame modifications. AI caption The underside of a vehicle is shown, with the exhaust system and rear axle clearly visible. It is supported by jack stands. AI caption Underside view of a vehicle's frame showing a custom bracket and engine mount assembly. AI caption A close-up view of a welded metal frame, possibly part of a custom build or repair project. AI caption Custom steel part with mounting tabs, likely for automotive use, resting on a decorative fabric. AI caption Custom fabrication work is being done on the underside of a vehicle, focusing on the frame and suspension components. AI caption