DSC03110.JPG
1423 hits | 72.52 KB | Posted: 8/3/09
Headliner from the removable top of a 94 Eddie Bouer. Already started dying it black.

DSC03111.JPG
1088 hits | 47.95 KB | Posted: 8/3/09
Another angle

DSC03112.JPG
1164 hits | 58.02 KB | Posted: 8/3/09
This is what I dyed it with. It's more like paint than actual dye. It took several very thin coats t...

DSC03116.JPG
1470 hits | 67.1 KB | Posted: 8/3/09
Two cans and several thin coats later, I have a black headliner to match my black removable top.
(...

DSC03437.jpg
1807 hits | 47.78 KB | Posted: 8/3/09
The factory setup. No headliner, just black fiberglass. This thing gets so hot on sunny summer days ...

DSC03438.jpg
1167 hits | 51.97 KB | Posted: 8/3/09
Gonna need to do a little cleaning after the install.

DSC03439.jpg
1486 hits | 61.9 KB | Posted: 8/3/09
The headliner is suppoesd to simply pop into place and rest on top of the seals for the window. They...

DSC03440.jpg
1415 hits | 41.18 KB | Posted: 8/3/09
And it fits. Supported completly by the window seals at this point. It littaraly does pop into place...

DSC03441.jpg
1188 hits | 64.04 KB | Posted: 8/3/09
View rearword. I added a harness for the light, and plan on hooking it up to the interior lights.

DSC03590.jpg
1147 hits | 37.6 KB | Posted: 8/26/09
Drilled holes in the inner top and installed trim push tabs. Note the light is on and is now wired i...

DSC03592.jpg
1194 hits | 27.84 KB | Posted: 8/26/09
Used another push tab to cover th seat belt retainer hole. Thes are glued n place with 3M servo tape...