SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ F-250/ 1980–1986/ 1986 F-250/ Pics supermotors.net/registry/6100/20048

Album section

Pics

From 1986 Ford F-250, documented by Drew Anderson.

62 photos
← Back to this vehicle
1986 Ford F-250 - A red truck cab sits in a garage, partially obscured by structural beams and hanging clothing. 1986 Ford F-250 - The chassis of a red 1986 Ford F-250 pickup truck is visible, undergoing some form of work. 1986 Ford F-250 - Dimensioned fabrication drawing of a custom frame crossmember and bumper mount noting plate thickness, angle iron and spring hangers. 1986 Ford F-250 - Brochure spread describing the H2 2-speed electronically-controlled full-time 4WD/TCS system that can climb a 10% grade with three wheels s… 1986 Ford F-250 - Close-up of a choke wire connector in an engine bay, with a hand holding it. 1986 Ford F-250 - A close-up view of a vehicle's engine bay shows a hand holding electrical wires near a diagram. 1986 Ford F-250 - Close-up of engine bay wiring with a hand manipulating wires near the battery. 1986 Ford F-250 - A wrapped automotive part with exposed electrical connectors sits on the carpet. 1986 Ford F-250 - A car part is partially unwrapped from brown paper on a carpeted floor. 1986 Ford F-250 - A custom metal panel with several holes and two switches is taped to brown paper on a carpeted surface. 1986 Ford F-250 - A roll of brown paper secured with white tape rests on a textured carpet. 1986 Ford F-250 - Custom dashboard panel with switches and vent, wood grain trim is present. 1986 Ford F-250 - A dashboard trim piece with faux wood grain is shown, air vents and openings for controls. 1986 Ford F-250 - A close-up view of a single automotive battery terminal clamp. 1986 Ford F-250 - This black electrical component has several green and black connectors attached to it. 1986 Ford F-250 - A custom-built fuse box with numerous relays and connectors is shown, with wiring extending from the bottom and sides. 1986 Ford F-250 - This black electronic control module features numerous wire harnesses for various connections. 1986 Ford F-250 - Custom fuse box assembly with wiring harness connectors and a 4-fuse block. 1986 Ford F-250 - Undercarriage view of a truck, showing leaf springs and exhaust system components. 1986 Ford F-250 - The undercarriage of a 1986 Ford F-250 is visible, leaf springs and the exhaust system. 1986 Ford F-250 - Underbody view of vehicle wiring and frame components, not a complete vehicle. 1986 Ford F-250 - A close-up view of the undercarriage of a vehicle, showing various mechanical parts and exhaust system. 1986 Ford F-250 - Undercarriage view of a red truck, showing the leaf spring and exhaust system. 1986 Ford F-250 - A close-up view of a vehicle's wiring harness and an electrical connector. 1986 Ford F-250 - A close-up view of a vehicle's electrical connector, held for inspection. 1986 Ford F-250 - A hand holds a white electrical connector against a dark background. The Supermotors logo is visible in the lower right corner. 1986 Ford F-250 - Close-up of an electrical connector and associated wiring, held by a hand. 1986 Ford F-250 - This image shows a close-up view of a greasy engine component, likely a bearing housing, with a central opening. 1986 Ford F-250 - This part shows significant rust and water accumulation, indicating potential damage or neglect. 1986 Ford F-250 - This photo shows a close-up view of a vehicle's axle housing, revealing some rust and wear. 1986 Ford F-250 - Engine removal in progress on a red truck, supported by jack stands and a hoist. 1986 Ford F-250 - The undercarriage of a red vehicle is visible, with leaf springs and suspension components supported by jacks. 1986 Ford F-250 - A collection of leaf springs, showing varying degrees of wear and tear, are displayed on a textured surface. 1986 Ford F-250 - Measuring a bearing with a tape measure, showing measurements from 52 to 55 inches. 1986 Ford F-250 - A tape measure is used to measure a rusty suspension component, showing a reading near 51.5 inches. 1986 Ford F-250 - A Craftsman protractor is used to measure the angle of a vehicle's frame component. 1986 Ford F-250 - A close-up view shows a measuring tape positioned over a metal hole, indicating its approximate diameter. 1986 Ford F-250 - Measuring a metal part with a yellow tape measure. The reading is around 50.5 inches. 1986 Ford F-250 - The front suspension and radiator of a truck are visible in this close-up shot. 1986 Ford F-250 - Close-up view of a truck's undercarriage, highlighting the differential and suspension system. 1986 Ford F-250 - Close-up view of the frame and suspension components of a red truck, with blue tape visible on the body. 1986 Ford F-250 - Undercarriage view of a red truck, showing the rear axle and suspension system. 1986 Ford F-250 - Front view of a disassembled 1980s Ford F-250 truck, with its grille and hood missing. 1986 Ford F-250 - Close-up view of the rear axle and suspension components on a 1986 Ford F-250. 1986 Ford F-250 - Undercarriage view of truck suspension and steering parts, including a red differential and leaf spring. 1986 Ford F-250 - A custom-fabricated bumper is supported by jack stands, with large tractor tires in the background. 1986 Ford F-250 - Custom bumper fabrication in progress on a 1986 Ford F-250 truck frame. 1986 Ford F-250 - The front of a Ford truck is shown, possibly undergoing modifications or repairs, with a custom bumper installed. 1986 Ford F-250 - This Ford F-250 shows a custom bumper and front suspension components. 1986 Ford F-250 - Front end of a black truck, possibly from the 1980s, is raised on jacks with the grille removed for maintenance. 1986 Ford F-250 - Front view of a Ford truck with a custom bumper and grille. A red jerry can is visible to the left. 1986 Ford F-250 - The front grille of a Ford truck, likely from the early 1980s, is shown in a workshop setting. 1986 Ford F-250 - Front view of a Ford truck with its grille and bumper removed, showing internal components and repair work. 1986 Ford F-250 - Front end of a red and blue truck, likely from the early 1980s, is in a state of repair with its grille removed and an engine suspended abo… 1986 Ford F-250 - New aluminum intake manifold for sale, part number visible on the casting. 1986 Ford F-250 - An engine is wrapped in plastic and suspended by chains, ready for transport or storage. 1986 Ford F-250 - An engine, wrapped in plastic and hanging from chains, is the focus of this image. 1986 Ford F-250 - This pickup truck chassis, possibly from the early 1980s, is in a workshop with its body partially disassembled. 1986 Ford F-250 - The vehicle's engine is suspended by chains while the frame rests on jack stands. 1986 Ford F-250 - Engine removal in progress on a red truck, with the engine hoisted by chains and secured by jack stands. 1986 Ford F-250 - This red pickup truck appears to be undergoing repairs or modifications in a garage setting. 1986 Ford F-250 - Measuring tape against a red vehicle panel, likely for part fitment or clearance.