SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1980-1986/ “Jezebel”/ Trailer supermotors.net/registry/6364/25539

Album section

Trailer

From 1983 Ford Bronco “Jezebel”, documented by michael collins.

40 photos
← Back to this vehicle
1983 Ford Bronco - i found this on Craigs list for free. 1983 Ford Bronco - this boat was in poor shape. 1983 Ford Bronco - here is the last picture of the boat. 1983 Ford Bronco - This was an old boat trailer that i am making into a Flat 6'X10" trailer. 1983 Ford Bronco - I need to fix the tounge and the pivet mount was damaged so i cut out the old bolt. 1983 Ford Bronco - while getting parts i found this chipper shipping create. the store owner said get it out of here....so i did. this will make a great plat… 1983 Ford Bronco - this was the rest or the top of the create. 2"X2" thin stock. 1983 Ford Bronco - here is the base all cut and getting ready to re-weld the correct way.not bad for free... 1983 Ford Bronco - ok- it been awhile but some of the plans changed. i got this back out on the side yard and started to build the trailer. it will be 4'X10"… 1983 Ford Bronco - this is what i came up with i welded in a round stock in the square tubing to give a better weld angle. 1983 Ford Bronco - here is the top view of the new hinge. 1983 Ford Bronco - i then took a tire iron and chopped the rod to the correct size. i then drilled and pinned the hinge into place. 1983 Ford Bronco - out came the axle. i had many different ideas on size but the final size is going to be 4X9 or 4X10. 1983 Ford Bronco - i had this steel shelf sitting on the side of the house and it was 42" wide so i chopped in half. I welding it to the center bars. 1983 Ford Bronco - Here is the other side. it is almost ready for the deck and sides. 1983 Ford Bronco - now the deck is all weleded. here is the front lower deck protection and start of the side. 1983 Ford Bronco - i installed the front leg and wheel. 1983 Ford Bronco - here is another view of the completed deck. 1983 Ford Bronco - with the corner posts in place i was tring a few different sides rails and supports. this was the final look. it is currently duct tape. 1983 Ford Bronco - here is what it will look like from behind. i do not need the 2 supports in the front but it looks better. 1983 Ford Bronco - here is what it will look like from the front. 1983 Ford Bronco - ok all the sides and rails are done. i just need to add the floor and wireing for the lights. then paint 1983 Ford Bronco - just need the lights and saftey chain and the other fender and she is ready to roll. 1983 Ford Bronco - here it is from the front. i put the bed liner in to see how it look completed. 1983 Ford Bronco - here is is from the rear. 1983 Ford Bronco - i got the sides all welded in place.and a coat of flat black on the metal. 1983 Ford Bronco - here is the front almost done. 1983 Ford Bronco - here it is with a new floor. 1983 Ford Bronco - i got a set of trailer lights from home depot. $20 1983 Ford Bronco - here is the back of the light package. 1983 Ford Bronco - here is the light kit open. 1983 Ford Bronco - i bolted the lights in place. looking good. 1983 Ford Bronco - here is the light installed on the pass side. 1983 Ford Bronco - here is the safety chain anchor. 1983 Ford Bronco - you can see the light and the shocks installed. 1983 Ford Bronco - here is the pass side shock installed 1983 Ford Bronco - here is the pass side fender installed. 1983 Ford Bronco - here is the driver side. it turned out good. Time to register it and go put it to work. 1983 Ford Bronco - here is the final part the safety chain installed. 1983 Ford Bronco - here is the trailer with the new deck and some of the corners clipped.This was a great project.