3-51v-r00-83-bronco.jpg
3613 hits | 75.22 KB | Posted: 10/31/06
I got lucky and found the last of the part number on the vaccum diagram sheet. the rest of the sheet...

charcole can.jpg
969 hits | 109.66 KB | Posted: 10/31/06
My charcole can mount was broken so i went to the junk yard and got a new one here it is as i brough...

bronco smog.jpg
793 hits | 86.54 KB | Posted: 10/31/06
Here it is after some cleanup. this is the back side and you can see there is a tab at the bottom th...

smog2.jpg
729 hits | 87.3 KB | Posted: 10/31/06
Here is the front side of the can. it is ready to go in. this connects to the vaper recovery line in...

new oil cap.jpg
901 hits | 120.94 KB | Posted: 10/31/06
good think i know a person in the smog business. i failed inspection due to the oil cap being wrong....

VALVE COVER.jpg
860 hits | 127.28 KB | Posted: 10/31/06
I failed for a few reasons this truck is in smog confusion centrail. it is a fed 48 truck and someon...

smog failed bad egr.jpg
753 hits | 106.55 KB | Posted: 10/31/06
Ok on the next trip i found the EGR valve was junk and needed to be replaced. here is the old bad va...

egr.jpg
796 hits | 116 KB | Posted: 12/28/06
another view of the EGR ready to come out

egr2.jpg
693 hits | 117.17 KB | Posted: 12/28/06
here is the bad EGR almost ready to come out.

new-egr.jpg
721 hits | 119.97 KB | Posted: 10/31/06
Here is the new EGR installed. i had to use the correct washer in the system. different calibrations...

EGR WOT loop.jpg
639 hits | 67.77 KB | Posted: 10/31/06
i got luckey and found a FED 48 truck in the junk yard. i was missing the WOT system and the EGR tub...

vacc advance loop.jpg
662 hits | 48.99 KB | Posted: 10/31/06
Here is the Vac advance system a fast cleanup and it will be installed.

WOT circuit.jpg
689 hits | 52.98 KB | Posted: 10/31/06
This is the WOT (wide open throddle) system. I did not have this on the bronco. this was another jun...

WOT bracket.jpg
594 hits | 30.41 KB | Posted: 11/6/06
Here is the WOT mount after being cleaned up and painted.

EGR loop ready to install.jpg
623 hits | 52.08 KB | Posted: 10/31/06
here is the EGR system loop (there is the cruse control cut out switch in the upper right but that i...

failed smog bad vacc tree.jpg
665 hits | 89.53 KB | Posted: 10/31/06
Ok the next failure was this temp vac tree. so i have to replace it now.

new-4port.jpg
585 hits | 97.8 KB | Posted: 10/31/06
Here is the new 4 port tree installed.

O2.jpg
635 hits | 106.94 KB | Posted: 10/31/06
Ok next failed reason was this is a FED 48 truck so it does not require an O2 sensor so i need to di...

EGR hose.jpg
675 hits | 83.53 KB | Posted: 12/28/06
here is the new EGR and WOT lines installed

cat hollow.jpg
641 hits | 112.37 KB | Posted: 11/6/06
Here is one reason it failed. the PO hollowed out the cat.

new cat4.jpg
627 hits | 71.36 KB | Posted: 10/31/06
OK the next failure reason the cat was not working correctly. (i found out the PO beat out all the c...

new-cat.jpg
609 hits | 65.1 KB | Posted: 10/31/06
here is a side view of the new cat.

new cat2.jpg
684 hits | 69.85 KB | Posted: 11/6/06
you can see the catalyst in the cat with this pic.

intake-warmup3.jpg
644 hits | 112.98 KB | Posted: 10/31/06
This is the heat stove. it is needed for the warm up in the smog system. mine was in ok shape but si...

intake-warmup2.jpg
656 hits | 98.82 KB | Posted: 10/31/06
hee is a diferent view of the warm up stove.

intake-warmup.jpg
665 hits | 102.17 KB | Posted: 10/31/06
Here is the warm up stove all painted and reinstalled. looks good.

timingdriver.jpg
1243 hits | 83.73 KB | Posted: 10/31/06
I had a hard time timing this beast. there are timing markes on both sides of the motor. this is the...

timingdriver2.jpg
763 hits | 95.71 KB | Posted: 10/31/06
to make things easier to time ford ran the maroks on the driver side up the timing coveryou can see ...

timingdriver3.jpg
729 hits | 96.58 KB | Posted: 10/31/06
after yanking out my hair and my mind i did find the driver side was the side to time off of, but th...

timing-mark.jpg
716 hits | 82.24 KB | Posted: 10/31/06
here is the hail line i used a paint pen to make it easier to see when timing the truck.

timingpass.jpg
757 hits | 95.43 KB | Posted: 10/31/06
here was one issue i had the notch did not line up with the pass side marks. i then found these mark...