DCAM0153.JPG
358 hits | 66.18 KB | Posted: 10/4/05
This is looking from the passenger door of a 2002 Monty Carlo that I did the stereo work in.

DCAM0154.JPG
616 hits | 64.78 KB | Posted: 10/4/05
Straight on.

DCAM0155.JPG
450 hits | 66.62 KB | Posted: 10/4/05
From the trunk.....one single RF Punch 12 inch.

DCAM0156.JPG
372 hits | 66.02 KB | Posted: 10/4/05
Another view.

DCAM0157.JPG
428 hits | 73.26 KB | Posted: 10/4/05
Another

DCAM0145.JPG
413 hits | 74.05 KB | Posted: 10/5/05
This is what I started with......just a plain trunk.

DCAM0138.JPG
463 hits | 55.99 KB | Posted: 10/5/05
Than I made the box and part of the floor at the angle I wanted the sub at.

DCAM0139.JPG
434 hits | 59.26 KB | Posted: 10/5/05
Another view..........

DCAM0140.JPG
536 hits | 61.69 KB | Posted: 10/5/05
One more.........

DCAM0141.JPG
564 hits | 59.12 KB | Posted: 10/5/05
Than I made the amp rack..and mounted it..

DCAM0142.JPG
532 hits | 59.9 KB | Posted: 10/5/05
Just a flat piece of MDF on the back of the sub box......well glued so it does not vibrate....

DCAM0143.JPG
540 hits | 62.44 KB | Posted: 10/5/05
This is what it looks like mounted in the trunk.

DCAM0144.JPG
563 hits | 65.76 KB | Posted: 10/5/05
After all that is where you want it you build a frame for you to make the pannel to dress everything...

DCAM0146.JPG
576 hits | 52.61 KB | Posted: 10/5/05
Than you pull over your material and staple or hot glue it to the frame and start adding your fiberg...

DCAM0150.JPG
768 hits | 58.7 KB | Posted: 10/5/05
After you added about 3-4 coats of resin and even some fiberglass mat/cloth.....you always have to c...

DCAM0156.JPG
586 hits | 66.02 KB | Posted: 10/5/05
After all that is done you pull over and glue down your covering and install and let it pound..........

DCAM0153.JPG
595 hits | 66.18 KB | Posted: 10/5/05
Sorry I lost all of my pics of the build for the amp/cap rack but it is about the same idea....