SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1978-1979/ “HillBilly Heaven”/ F3TE 460 heads supermotors.net/registry/9046/32764

Album section

F3TE 460 heads

From 1979 Ford Bronco “HillBilly Heaven”, documented by Monstermiler.

15 photos
← Back to this vehicle
1979 Ford Bronco - Tight shot of the casting numbers "73TE" and "6090-JA" stamped along the intake rail of a rebuilt cast-iron cylinder head, with cylinder ma… 1979 Ford Bronco - Rebuilt cast-iron V8 cylinder head laid on a white tarp in sunlight, viewed from the intake side with four rectangular intake ports and cas… 1979 Ford Bronco - Freshly rebuilt cast-iron V8 cylinder head sitting on a white tarp-covered bench outdoors, viewed from the intake-port side with four round… 1979 Ford Bronco - A rebuilt cast-iron V8 cylinder head sitting on a white tarp-covered table outdoors, viewed from the intake-manifold face with four round i… 1979 Ford Bronco - Freshly machined bare cast-iron cylinder head sitting intake-side out on a tarp-covered table outdoors, with four rectangular intake ports… 1979 Ford Bronco - This is a close-up view of an engine's cylinder head, two valves. 1979 Ford Bronco - Close-up of a combustion chamber on the deck face of a cylinder head, showing two closed valve faces seated flush inside fresh machined sea… 1979 Ford Bronco - Macro view down a cylinder head port at the valve guide boss and the back of a closed valve, with sunlight glinting off the machined guide… 1979 Ford Bronco - Tight close-up looking into a large round port on a cast-iron cylinder head, with a bright machined seat ring around the mouth and a raised… 1979 Ford Bronco - Tight close-up looking into a round intake port on the manifold face of a cast-iron cylinder head, showing the short-side radius and the gr… 1979 Ford Bronco - Macro shot into two adjacent port bowls of a bare cast-iron cylinder head, showing freshly machined valve seat rings and protruding valve g… 1979 Ford Bronco - Close-up looking into a large round port on a cast-iron head or manifold, with a freshly machined valve seat ring around the opening and a… 1979 Ford Bronco - Slightly soft-focus macro into a valve pocket of a bare cylinder head, centered on the machined valve guide boss and the freshly cut seat r… 1979 Ford Bronco - Close-up into a port bowl of a bare cast-iron cylinder head, showing the machined valve seat ring, as-cast textured bowl walls and a bright… 1979 Ford Bronco - This is a close-up view of an engine's cylinder head, showing a valve stem within a combustion chamber.