Ford Bronco/F-Series Spindle Rolling Diaphragm Seal Install Diagram - T95T-3132-C

This document is a single illustration from a Ford service manual showing the installation of the spindle rolling diaphragm seal on a front axle spindle. The exploded-view diagram shows three components in line: the spindle (base part number 3105) with its mounting flange and machined shaft, the spindle rolling diaphragm seal (base part number 3254), and the special service tool used to press the seal into place. The tool is labeled as Spindle Seal Replacer T95T-3132-C, with a note that it is to be used with Driver Handle T83T-3132-A1. A hand is shown holding the seal replacer tool aligned with the seal and spindle, indicating the direction and method of installation. The figure carries the Ford illustration reference number E9765-B. From this page a reader can learn the correct Ford special tool numbers required to install the spindle rolling diaphragm seal and the base part numbers for the spindle and seal, which is useful when servicing front wheel hubs, spindles, or performing axle/knuckle work on Ford 4x4 trucks. No year, model, torque values, or written procedure text appear on this page—only the labeled illustration.