Steve83 > 1999 Ford Crown Victoria > open folder Headlight Switch Bulbs > hlsw11.jpg

File 12 of 31
Prev | Next

Share This
Url
Tag
Img
Thumb

hlsw11.jpg Instead of using the 12V incandescent bulb, I decided to use the 3.7V LED, and a 560Ohm resistor. I removed the LED's lip & the holder's recessed end so the assembly would be about as long as stock. Then I notched the side of the holder so the resistor would fit flush, and wrapped its long end around the base like the stock bulb's wires.
hlsw11.jpg | Hits: 1508 | Posted on: 11/26/06 | View original size (147.74 KB)

Instead of using the 12V incandescent bulb, I decided to use the 3.7V LED, and a 560Ohm resistor. I removed the LED's lip & the holder's recessed end so the assembly would be about as long as stock. Then I notched the side of the holder so the resistor would fit flush, and wrapped its long end around the base like the stock bulb's wires.