Home/ Registry/ Ford/ Bronco/ 1992-1996/ “Bronco Bill”/ Photo supermotors.net/registry/media/498511

Yellow metal vehicle bracket with ground-bare mounting pocket, r…

‹ ›

arm restView all 12

Yellow molded foam vehicle armrest pad clamped on a workbench with a cut-off foam strip

Yellow seat foam bolsters being trimmed with a knife on a workbench

Yellow foam armrest pad held open to show exposed mounting bolt in a workshop

Hand peeling the skin off a yellow seat foam bolster at a workbench

End of a yellow foam vehicle armrest pad cut open on a wooden workbench

Yellow seat foam cut open exposing rusty steel seat frame and pivot bolt

Original yellow seat foam bolster beside a tape-wrapped rebuilt bolster on a bench

Hand holding a gray cloth-recovered interior trim piece with masking-taped end in a workshop

Hand holding a gray cloth-covered seat armrest pad over a workbench

Blue cloth cover being pulled over a taped foam armrest core

Blue cloth center armrest between bucket seats with seat belt buckle and ratchet

12photos in this albumView all

Close-up on a workbench of a yellow-painted metal bracket or bumper end with a recessed mounting pocket, its weld area ground bare to gray metal around the bolt hole. A steel retainer plate/spacer and a flanged hex-head bolt with a captive washer sit loose alongside on the worn wooden bench.

AI caption March 2007 · Photo 19 of 519