snubber clearance gap should be increased. For a firm TECHNICAL SERVICE competition ride, the snubber clearance gap can be decreased. If vehicle torque steers (pulls to right or left) under acceleration due to traction bars, the snubber clearance gap can be adjusted to eliminate this problem. A highly trained technical service department is maintained by Lakewood Industries to answer your technical questions, provide additional product information and offer various recommendations. See your local retailer of Lakewood products for specific prices.Technical service calls, correspondence and warranty questions should be directed to the following address: To correct unequal traction, try the following: a) Be sure that both tire pressures are equal. b) if vehicle torque steers to the right under acceleration, decrease the gap on the right Lakewood Industries side bar. . _ 10601 Memphis Ave. #12 c) If vehicletorqge Steers tho the left urrildelrft Cleveland, Ohio 44144 age terauon, ecrease t e gap on t e e Phone 216-688-8300 ext. 500 3' e a 8:30 A.M.-12:OO PM, 1:00 P.M.5:00 PM. EST REPLACEMENT PARTS WWW-mrgaSkEt-Com Urethane Snubbers (2/set) ........ #20700 RETAIN THIS INSTRUCTION SHEET W ., 7* :Rubberfsntxbbers '(2'Iset) ........ #20530 ' FOR FUTURE REFERENCE. W Rear bracket with mounting clamp on top of spring. Position bar to allow adequate clearance around brake lines, parking, brake..,cable, gingham- EM, -w- Locate snubber under front spring eye. P/N 97144059