Push Bar 001.jpg
504 hits | 56.07 KB | Posted: 1/10/06
Push bar from junkyard for 50.00

Push Bar 002.jpg
2887 hits | 54.98 KB | Posted: 1/10/06
Push bar #2

Push Bar 003.jpg
940 hits | 49.94 KB | Posted: 1/10/06
Push bar #3, pretty good amount of rust on it.

Push Bar 004.jpg
371 hits | 49.6 KB | Posted: 1/10/06
Another shot, on the front there was some fairly deep gashes/dents from brush

Push Bar 006.jpg
1140 hits | 45.94 KB | Posted: 1/10/06
Used a 4 1/2" angle grinder and wire brush, went really fast. Took the rust and old primer/paint rig...

Push Bar 007.jpg
316 hits | 39.18 KB | Posted: 1/10/06
where there was the rust, there is no more.

Push Bar 010.jpg
286 hits | 63.6 KB | Posted: 1/10/06
All clean and shiny, ready for primer

Push Bar 011.jpg
459 hits | 40.42 KB | Posted: 1/10/06
Primer on one side.

Push Bar 012.jpg
931 hits | 40.73 KB | Posted: 1/10/06
Primed on both sides, used a $3 bottle from Kmart etc. works well. Ready for Dupli-Color Bedliner.

Push Bar 016.jpg
278 hits | 64.59 KB | Posted: 1/10/06
Top half is the bed liner, bottom shows the Primer.

Push Bar 018.jpg
318 hits | 86.31 KB | Posted: 1/10/06
Half way done, 2X coats of the bed liner, using the Spray can of it. (that shit stinks bad...)