IMAG0114.jpg
195 hits | 88.66 KB | Posted: 4/10/12
Bracketry after being sandblasted and primered. Left to right: smog pump bracket, water pump pulley,...

IMAG0116.jpg
169 hits | 72.54 KB | Posted: 4/10/12
Valvle cover after being sandblasted and internal baffles removed. Hung for primer

IMAG0117.jpg
166 hits | 85.63 KB | Posted: 4/10/12
Valve covers being baked after sprayed with wrinkle paint. 200 degrees for 1 hour

IMAG0145.jpg
243 hits | 97.09 KB | Posted: 4/10/12
Lower intake manifold taped off and ready for paint

IMAG0148.jpg
328 hits | 93.58 KB | Posted: 4/10/12
Diffrent view of taped off manifold

IMAG0154.jpg
319 hits | 88.27 KB | Posted: 4/10/12
Lower intake manifold pictured next to the VHT Wrinle Paint im coating it with

IMAG0159.jpg
246 hits | 93.98 KB | Posted: 4/10/12
After spraying it with 3 heavy coats of the Wrinkle Paint. Applied horizontaly, verticaly, and diago...

IMAG0165.jpg
239 hits | 64.25 KB | Posted: 4/10/12
I let the manifold air dry for 2 hours and then baking in the oven at 200 degrees for 1 hour. It gav...

IMAG0181.jpg
241 hits | 60.83 KB | Posted: 4/10/12
Front view after removing it from oven

IMAG0183.jpg
329 hits | 64.17 KB | Posted: 4/10/12
Rear view

IMAG0184.jpg
333 hits | 77.57 KB | Posted: 4/10/12
Closeup of the wrinkle finish. Subtle texture that turned out great

IMAG0190.jpg
280 hits | 94.19 KB | Posted: 4/19/12
Intake manifold after wire brushing and washing a dozen times in prep for paint

IMAG0195.jpg
263 hits | 72.07 KB | Posted: 4/19/12
After wrinkle paint

IMAG0197.jpg
278 hits | 68.56 KB | Posted: 4/19/12