blaklbl88 > 1986 Ford Bronco

1986 Ford Bronco
Owner: blaklbl88         (All of this user's registries on SuperMotors)
From: boise, ID, U.S.A.        (Other registries in ID)
Year, Make, & Model: 1986 Ford Bronco        (Other Ford Broncos)
Avatar:
Nickname:
Mileage:
Engine: EFI 302 5.0L
E5 heads/ground out exhaust passage bumps
Wrinkle coated valve covers, upper/lower intake
100 amp 1 wire alternator
MSD Blaster TFI coil

*WORK IN PROGRESS*

Future mods:

Crane SD compatible cam
Full Length headers

Drivetrain: Rebuit AOD Trans (joppa automatic)
B&M Shift Kit
8.8 rear (stock)
D44 TTB front (stock)
Warn premium locking hubs
Notes:
Last Updated: 3/12/2013
Hits: 2035
Album
Folder Hits Comments Created Updated
folder Pics20037204/8/124/8/12
folder Head Gasket Replacement - W.I.P.40054204/8/124/8/12
folder Cleaning/painting top end14003,62904/10/124/19/12
Newest Media Files
IMAG0197.jpg
IMAG0197.jpg
278 hits | 68.56 KB | Posted: 4/19/12
After wrinkle paint
IMAG0195.jpg
263 hits | 72.07 KB | Posted: 4/19/12
After wrinkle paint
Intake manifold after wire brushing and washing a dozen times in prep for paint
IMAG0190.jpg
280 hits | 94.19 KB | Posted: 4/19/12
Intake manifold after wire brushing and washing a dozen times in prep for paint
Closeup of the wrinkle finish. Subtle texture that turned out great
IMAG0184.jpg
333 hits | 77.57 KB | Posted: 4/10/12
Closeup of the wrinkle finish. Subtle texture that turned out great
Rear view
IMAG0183.jpg
329 hits | 64.17 KB | Posted: 4/10/12
Rear view
Front view after removing it from oven
IMAG0181.jpg
241 hits | 60.83 KB | Posted: 4/10/12
Front view after removing it from oven
I let the manifold air dry for 2 hours and then baking in the oven at 200 degrees for 1 hour. It gave the house a nice fresh motor smell...lucky the gf wasnt home
IMAG0165.jpg
239 hits | 64.25 KB | Posted: 4/10/12
I let the manifold air dry for 2 hours and then baking in the oven at 200 degrees for 1 hour. It gave the house a nice fresh motor smell...lucky the gf wasnt home
After spraying it with 3 heavy coats of the Wrinkle Paint. Applied horizontaly, verticaly, and diagonaly. Each coat roughly 5 minutes apart
IMAG0159.jpg
246 hits | 93.98 KB | Posted: 4/10/12
After spraying it with 3 heavy coats of the Wrinkle Paint. Applied horizontaly, verticaly, and diagonaly. Each coat roughly 5 minutes apart
Lower intake manifold pictured next to the VHT Wrinle Paint im coating it with
IMAG0154.jpg
319 hits | 88.27 KB | Posted: 4/10/12
Lower intake manifold pictured next to the VHT Wrinle Paint im coating it with
Most Viewed Files
Closeup of the wrinkle finish. Subtle texture that turned out great
IMAG0184.jpg
333 hits | 77.57 KB | Posted: 4/10/12
Closeup of the wrinkle finish. Subtle texture that turned out great
Rear view
IMAG0183.jpg
329 hits | 64.17 KB | Posted: 4/10/12
Rear view
Diffrent view of taped off manifold
IMAG0148.jpg
328 hits | 93.58 KB | Posted: 4/10/12
Diffrent view of taped off manifold
Lower intake manifold pictured next to the VHT Wrinle Paint im coating it with
IMAG0154.jpg
319 hits | 88.27 KB | Posted: 4/10/12
Lower intake manifold pictured next to the VHT Wrinle Paint im coating it with
Intake manifold after wire brushing and washing a dozen times in prep for paint
IMAG0190.jpg
280 hits | 94.19 KB | Posted: 4/19/12
Intake manifold after wire brushing and washing a dozen times in prep for paint
IMAG0197.jpg
IMAG0197.jpg
278 hits | 68.56 KB | Posted: 4/19/12
After wrinkle paint
IMAG0195.jpg
263 hits | 72.07 KB | Posted: 4/19/12
After wrinkle paint
IMAG0131.jpg
IMAG0131.jpg
251 hits | 67.44 KB | Posted: 4/8/12
After spraying it with 3 heavy coats of the Wrinkle Paint. Applied horizontaly, verticaly, and diagonaly. Each coat roughly 5 minutes apart
IMAG0159.jpg
246 hits | 93.98 KB | Posted: 4/10/12
After spraying it with 3 heavy coats of the Wrinkle Paint. Applied horizontaly, verticaly, and diagonaly. Each coat roughly 5 minutes apart
Maintenance & Modification Logs
This user hasn't added any log entries, yet.