2013-05-26_12-20-30_860.jpg
314 hits | 91.8 KB | Posted: 6/16/13
Passenger side tonneau rail. 2"x1/4" aluminum flat bar. 4 holes marked and drilled for t...

2013-05-26_12-20-54_971.jpg
208 hits | 97.97 KB | Posted: 6/16/13
Passenger rear corner. You can see where I screwed in snap studs to my tailgate cover, rather than ...

2013-05-26_12-21-13_547.jpg
174 hits | 91.5 KB | Posted: 6/16/13
Driver's side rear corner. Except for the spacing of the next to last screw (which varies from left...

2013-06-01_20-22-55_852.jpg
184 hits | 81.61 KB | Posted: 6/16/13
Wooden bows and mounting slats. I got them off an eBay store. The came as bare mahogany, so I stai...

2013-06-15_11-32-16_100.jpg
222 hits | 91.15 KB | Posted: 6/16/13
Cover snapped into place on the sides, rear, and middle bow. The excess is tucked back and the seat...

2013-06-15_11-45-08_372.jpg
304 hits | 85.56 KB | Posted: 6/16/13
Here the seat's folded up and the cover is snapped to the forward bow.

2013-06-16_09-37-02_905.jpg
352 hits | 77.43 KB | Posted: 6/16/13
Underside of the cover. The green webbing in the center runs all around the perimeter, wrapped in t...

2013-06-16_09-38-53_80.jpg
333 hits | 84.01 KB | Posted: 6/16/13
closeup of the seam and the snaps.

2013-06-16_09-50-55_582.jpg
302 hits | 72.5 KB | Posted: 6/16/13
Corner re-inforcement

2013-06-16_09-49-39_603.jpg
312 hits | 73.09 KB | Posted: 6/16/13
Here's the rail. Snaps every 8", except at the rear. Small eye hooks for cargo and the bikini...

2013-06-16_09-50-14_493.jpg
283 hits | 64.12 KB | Posted: 6/16/13
Closeup of the tubing hinge, snaps, and the eye.

2013-06-16_09-50-28_69.jpg
279 hits | 74.54 KB | Posted: 6/16/13

2013-06-16_09-53-27_553.jpg
267 hits | 68.1 KB | Posted: 6/16/13
The start of the bikini top. The green webbing goes to the front, attaching to snap studs on the bo...

2013-06-16_09-53-38_148.jpg
303 hits | 75.27 KB | Posted: 6/16/13
The start of the bikini top. The green webbing goes to the front, attaching to snap studs on the bo...