SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “B3”/ 425ci Windsor stroker build -OLD- supermotors.net/registry/25989/85794

Album section

425ci Windsor stroker build -OLD-

From 1996 Ford Bronco “B3”, documented by Kingfish999.

17 photos
← Back to this vehicle
1996 Ford Bronco - Building a 425ci Windsor (418w kit with .060 bore instead of .030). The kit is made by Probe Industries. I will be using AFR 185 heads with… 1996 Ford Bronco - crankshaft installed. clearances are good and crank spins nicely. 1996 Ford Bronco - got the pistons and connecting rods assembled 1996 Ford Bronco - all pistons in and and everything checked out 1996 Ford Bronco - all pistons in 1996 Ford Bronco - Comp Cams 35-514-8 roller camshaft not the most aggressive cam but should give me alot of torque for DD and towing 1996 Ford Bronco - oil pump, pickup and windage tray installed 1996 Ford Bronco - got the AFR 185 heads on 1996 Ford Bronco - oil pan installed 1996 Ford Bronco - had to replace rocker studs with longer ones. installed lifters, pushrods and Mid-Lift 1.6 roller rockers 1996 Ford Bronco - valve covers dont clear the rockers 1996 Ford Bronco - installed the new timing cover. for timing cover/water pump bolts the timing cover/waterpump bolt kit i used is ARP 154-3202. it looks like… 1996 Ford Bronco - not a good pic but i mounted the valve covers with spacers and mounted the lower intake manifold. i ordered 1-3/8 inch valve cover spacers… 1996 Ford Bronco - installed waterpump, and started swapping the old EFI from the original engine over. painted the engine black to match the valve covers and… 1996 Ford Bronco - Ford V8 engine with 'Bronco POWERED BY FORD' valve covers, mounted on an engine stand. 1996 Ford Bronco - just an idea what it will look like. there was not much room to mount the coil or vacuum solenoids 1996 Ford Bronco - Close-up of a Ford V8 engine, likely undergoing a rebuild or modification, with specialized valve covers.