SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “B3”/ Engine Swap supermotors.net/registry/25989/85901

Album section

Engine Swap

From 1996 Ford Bronco “B3”, documented by Kingfish999.

10 photos
← Back to this vehicle
1996 Ford Bronco - last time the original engine will run. it is still dirty from last offroading trip 1996 Ford Bronco - got the engine pulled. was a tight squeeze with the intake still on but i managed. 1996 Ford Bronco - got the old EFI setup stripped so i can start swapping it on the new. 1996 Ford Bronco - getting ready to swap the new engine in 1996 Ford Bronco - got the engine dropped in and bolted to the tranny i decided im going to temporarily use the current tranny despite having almost no revers… 1996 Ford Bronco - this intake manifold doesnt allow for the stock location of the vacuum solenoids, DPFE sensor, or the ignition coil. i decided to mount the… 1996 Ford Bronco - the left is an Accel 'Ultracoil' which i will be using. it is a universal coil with a mount that will allow me to mount it remotely off the… 1996 Ford Bronco - due to the size of the coil, i decided the best place to mount it would be between the battery tray and the vacuum reservoir on the wheel w… 1996 Ford Bronco - went ahead and started final assembly. even got it test fired and it started right up. i forogt to bypass the tranny cooler so it spewed al… 1996 Ford Bronco - went ahead and started final assembly. even got it test fired and it started right up. i forogt to bypass the tranny cooler so it spewed al…