Engine vacuum and EGR components with teal hose near firewall

this intake manifold doesnt allow for the stock location of the vacuum solenoids, DPFE sensor, or the ignition coil. i decided to mount the EGR vacuum solenoid to the firewall. luckilly the 96 351 so not have the 2 vacuum solenoids for the secondary air system. the only vacuum solenoid is for the EGR valve which i figured would be easiest to mount on the firewall. i extedned the stock wiring some to reach with plenty of slack

i havent decided on the location of the DPFE sensor. it will either be mounted on the firewall also right next to it or i will make a bracket and mount near the fuel rail.

i use an aftermarket coil that i will mount off the engine in a remote location

Owner caption September 2016 · Photo 118 of 406